User manual SIEMENS GIGASET A155

[. . . ] EN Dear Customer, Gigaset Communications GmbH is the legal successor to Siemens Home and Office Communication Devices GmbH & Co. Any statements made by Siemens AG or SHC that are found in the user guides should therefore be understood as statements of Gigaset Communications GmbH. Sehr geehrte Kundin, sehr geehrter Kunde, die Gigaset Communications GmbH ist Rechtsnachfolgerin der Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), die ihrerseits das Gigaset-Geschäft der Siemens AG fortführte. [. . . ] Only place the handset in the base/ charging cradle that is intended for it. Calling Line Identification When you receive a call, the caller's number will be displayed on your handset; the caller's name will be displayed if it is stored in the directory or if CNIP has been requested. Requirements: 1 You have asked your network provider for the caller's number (CLIP) or name (CNIP) to be displayed on your handset screen. 2 The caller has asked the network provider for his number to be identified (CLI). The charge status of the batteries appears at the top right of the display: batteries flat S batteries 1/3 charged < batteries 2/3 charged OE batteries fully charged The handset is already registered with the base station. You must set the date and time to ensure that the times of calls are logged correctly (page 7). Your telephone is now ready to use. 4 In the display you will see EXTERNAL if you have not requested Calling Line Identification, WITHHELD if the caller has withheld CLI or UNAVAILABLE if CLI has not been requested. Speed dial list You can store up to ten numbers e. g. The speed dial list will be displayed with entries SHORTCUT 1, SHORTCUT 2 etc. Pressing j again displays the name stored in the directory. Using the directory and other lists Directory You can store up to 20 numbers and associated names. The following functions are available: NEW ENTRY SHOW NUMBER USE NUMBER EDIT ENTRY DELETE DELETE ALL Storing a telephone number in the speed dial list j ¢ SHORTCUT¢ OK xw OK Save new phone number. Return to directory with the i key. Select the required entry from the speed dial list. Delete all entries. xw~ OK Speed dialing For example, press and hold key I. If you select SHOW NUMBER the first 12 digits of the phone number are displayed. For long numbers: press w or x to display the first or last part of the number. Last number redial list This list contains the ten last dialled numbers. If the number is already saved with a name in the telephone book, the name of the caller is displayed. The following functions are available: Storing a number in the directory h¢ j ¢ NEW ENTRY ¢ ~OK ~OK a Enter phone number and confirm. Press and hold (back to idle status). COPY TO DIR SHOW NUMBER Store number in directory. Backspace delete one character at a time: press i key. USE NUMBER DELETE DELETE ALL Dialing with the directory h xw~ c Open directory. Press the talk key. Dialing a number You can select a number from the last number redial list: c¢ Select entry with xw¢c. 5 Calls list The numbers of the last 10 missed calls are stored. Set the date and time (page 7) so that the time of the call can be shown in the display. When the phone is in idle status, new missed calls are indicated by a flashing Ü. If the calls list is open, a new call is marked with the symbol Ü. Switching answering machine on/off Your answering machine is activated and ready for use as soon as your handset has been set up. When the answering machine is switched on the handset display shows the × icon and the ü key on the base is illuminated. Until you have recorded your own personal announcement, the stored pre-recorded announcement will be used. The ü key flickers, if you try to switch the answering machine back on. [. . . ] 1 Watt. 10 Questions and answers If you have any queries about the use of your telephone, visit our Website www. siemens. com/gigasetcustomercare for assistance 24/7. It also provides interactive troubleshooting, a list of FAQs and answers plus user guides for you to download. For personal advice on our range of products, call United Kingdom: 0906 9597555 0. 75 £/minute You can talk to qualified Siemens technicians who will guide you expertly through product information and installation. If your Siemens device needs repair or if you have a guarantee or warranty claim, you can get fast, reliable help from our Service Centres. [. . . ]