User manual SIEMENS GIGASET 5015 QUICK GUIDE

[. . . ] volume) Recall key pressed Pause *Manufactured by Gigaset Communications GmbH under trademark license of Siemens AG. 2 IRL Preparing the telephone for use Recommended installation of telephone Do not expose the telephone to direct sunlight or other sources of heat. Making calls Dialling a number co Lift handset, dial number. Operate at temperatures between +5°C and +40°C. Maintain a distance of at least one metre between the telephone and radio equipment, e. g. Do not install the telephone in dusty areas as this can shorten the service life of the telephone. To clean, wipe with a moist or antistatic cloth only, never with a dry cloth (risk of electrostatic charging and discharge) or harsh cleaning agent. [. . . ] Activating via the handset during a call: L + a Replace the handset while pressing the Loudspeaker key. Activating before dialling a phone number L Before you dial: press and hold the Loudspeaker key until the dialling tone is audible. Deactivating handsfree mode: c Lift the handset during a call. Locking/unlocking the telephone Only the Baby call number can be dialed when the telephone is locked. If the telephone is locked, the display shows zzzz. Temporarily deactivating the telephone lock (for one call) cMo Lift the handset, press the lock key, enter the o PIN (default setting: 0000). The telephone lock is active again when the handset is replaced. Activating/deactivating the mute melody You can activate and deactivate the mute melody for the mute (default setting: on). c?19# 0/1 ?a Lift handset, initiate function. Replace handset. Locking/unlocking repertory numbers so they cannot be changed c?M6 o 0/1 ?a Lift handset, initiate function. (If necessary, press = in order to lock/unlock the repertory key on the 2nd level. ) Enter the PIN (default setting: 0000). Replace the handset. 5 IRL Changing the PIN c?M9 o o o ?a Changing dialling modes during a call If your telephone is set to pulse dialling and you want to use functions that require tone dialling (e. g. remote access to an answering machine), you can change the dialling mode during a call. The telephone is reset to the original dialling mode by hanging up the handset. Lift handset, initiate function. Replace the handset. Call duration display The telephone can display the approximate call duration in the display (up to 99 min. If the call duration display is activated, the time display begins 12 seconds after the last digit is dialled. Resetting the counter After dialling the first digit or at any point during a call: N Press the Reset key. Deactivating/activating The call duration display is activated by default. Replace handset. Operation on a PABX Enter/delete an external line prefixe If you are using your telephone on a PABX, you may have to save one or more external line prefixes. If no external line prefixe has been set in a location, z appears in the display. If several external line prefixes are saved, these are displayed next to one another; the current external line prefixe to be edited flashes. If necessary, use the ; key to toggle between the external line prefixes displayed, to edit them as follows: To delete an external line prefix: ?a Press the Set key. To enter an external line prefixe: o Enter a one- to three-digit code. Enter additional external line prefixes: ;o Press the Last number redial key, enter next external line prefixe. Replace handset. c?18# 0/ 1 ?a Setting the pause time If necessary, the pause time of the Pause key < (pause function from second input position) can be changed to 1, 3 or 6 seconds (default setting: 3 seconds). c?102 0. . . 2 0: 1 sec. ; 1: 3 sec. ; 2: 6 sec. . Replace handset. Lift handset, initiate function. Changing the dialling mode c?# Lift handset, initiate function. [. . . ] In particular claims under the Guarantee cannot be made if: The device is opened (this is classed as third party intervention) Repairs or other work done by persons not authorised by Gigaset Communications. Components on the printed circuit board are manipulated The software is manipulated Defects or damage caused by dropping, breaking, lightning or ingress of moisture. This also applies if defects or damage was caused by mechanical, chemical, radio interference or thermal factors (e. g. : microwave, sauna etc. ) Devices fitted with accessories not authorised by Gigaset Communications This Guarantee shall not apply to or extend to services performed by the authorised dealer or the customer themselves (e. g. User manuals and any software supplied on a separate data medium shall be excluded from the Guarantee. [. . . ]