User manual SIEMENS GIGASET SE568 QUICK START GUIDE

[. . . ] The line filter prevents noise from disrupting the DSL signal on the phone line. Filters can be in the form of a stand-alone line filter or a wall-mount filter. Stand-alone Line Filter For each device that ahares the DSL phone line: 1. Plug the phone cord (or other device cord) into the filter. Wall-mount Filter For a wall-mounted phone, use a wall-mount filter: 1. [. . . ] Connect the USB cable to the USB port on the Gigaset device (blue port). Plug the DSL cable (RJ-11) into the DSL port on the Gigaset device (gray port). Plug the power adapter into the power outlet and Gigaset device (black port). Ensure the Gigaset device is powered on (power switch located on the right side of back panel). USB connection to computer 4 Internet Connection 3 RJ-11 DSL Cable 1 6 Power Supply 5 2 Hub Optional: Use Crossover (Xover) cable when connecting to a hub or switch without an "uplink" port Windows USB Driver Installation Software Installation If you are using connecting the Gigaset device via the USB port, you must install USB drivers. Before installing the software make sure your PC is equipped with Windows® 98, Windows® 98 Second Edition (SE), Windows® 2000 Professional, Windows® Millennium Edition (ME), or Windows® XP; 32MB RAM; Pentium-compatible 166MHz or faster processor; 12MB available hard disk space. Insert the Gigaset® Installation CD in to your CD-ROM drive to automatically start the software installation program. After the USB driver is installed, continue with the PC Configuration procedures described on the next page. If the software installation program does not start automatically, start it manually: 1. Browse to setup. exe on the CD and double-click it to start the program. Global network of innovation ns o are trad em arks of Siem ens AG, Germany. All other trademarks are held by their resp ve ecti . Sie ies pan com Macintosh USB Driver Installation Software Installation Before installing the software, make sure your system is running OS 8. 6 or above. This procedure will restart your computer to complete the installation. Follow the directions in Read me. txt to complete the software installation. After the USB driver is installed, continue with the PC Configuration procedures described on 5 the next page. me ns For Windows: Close all applications. If not, go to "My Computer. " Right-click and open the CD drive. Double-click on setup. exe. res erv es the righ t to make changes to product specifications at Windows/Mac OS September 2006 007-SE03-001 any time out with USB Drivers ice. All rights ens Siem and the me Sie log Option B> Macintosh Configuration Step 3 > Choose a Configuration Method The steps required to setup your system for using the Gigaset® depend on whether you use a PC or a Macintosh. [. . . ] If your PC has not been connected to a broadband modem or other network device, perform the PC configuration procedure below. The Gateway Setup Wizard appears to guide you through the setup process. When you have completed the Gateway Setup Wizard, you can connect to the Internet or configure additional options on the Gateway. Congratulations! [. . . ]