User manual SIEMENS EUROSET 2005

[. . . ] Do not install the telephone in dusty areas as this can shorten the service life of the telephone. To clean, wipe with a moist or antistatic cloth only, never with a dry cloth (risk of electrostatic charging and discharge) or harsh cleaning agent. Furniture lacquer and polish can be damaged by contact with parts of the unit (e. Enter the correct time in hours <hh> and minutes <mm> (24-hour mode). [. . . ] ) Using the Down/Up key, scroll through the list to the desired number. Dialling from the last number redial list Dialling using the repertory keys c Lift handset. The volume of the ringer can be set to one of 4 levels and can also be deactivated completely (default setting: level 4). While in handsfree mode, you can set the volume to one of 7 levels and save it (default setting: 1). The frequency (speed) of the ringer can be set to one of three levels (default setting: level 3). Baby call (direct call) number setting If a phone number is set for the Baby Call function, it is dialled automatically when the telephone is locked (s. "Activating/deactivating the telephone lock") after you lift the handset (or press the Loudspeaker key) and press any key (except ?The telephone does not allow other phone numbers to be dialled, but incoming calls can be received. When the baby call function is activated, you will see è and { in the display. Ten different ringtones can be set for the ringer (default setting: ringtone 9). The volume on the handset can be set to one of 3 levels and saved (default setting: level 1). You can retrieve the calls list, scroll through its entries, view additional information about a call and call back directly: A Press the Down key. Its position number "01" is displayed to the left of the number. If the phone number contains more than 17 digits, the first 17 digits will be displayed first, then the rest after one second. The date and time of the displayed entry is displayed with the number of calls (on the right). Back to the calls list (calling line display): = Press the Shift key again. Under the following conditions, the phone numbers of incoming calls are (a) shown on the display (up to the first 20 digits) and (b) automatically saved in a calls list: Both your network provider and the caller's network provider must offer Calling Line Identification. Both you and the caller must have requested this service (if necessary) from your respective network providers. If these conditions are met, but a caller has suppressed Calling Line Identification before making the call, you will see ---P--- on the display instead of the phone number. If it has not been possible to identify the number for other (technical) reasons, you will see ---0--- or ---E--- on the display. Using the repertory keys as "function keys" Different public telephone services/functions ­ possibly by order/request ­ can be selected via predetermined key combinations which you can obtain from your network provider. You can save the necessary key combinations like normal phone numbers on repertory keys and similarly "select" and also deactivate the service again. [. . . ] PABX only: No connection or incorrect connection when dialling from memory (e. The caller's phone number and the calls list are not displayed: Is the adapter connected (see page 2)?Saving "Deactivate call forwarding" on a function key The call forwarding, as described in the previous example, can be deactivated again with your network provider e. Blank insert strips for the repertory keys can be found on the Internet at http://www. [. . . ]