User manual SEH PS

[. . . ] Print Server PS Series User Manual Manufactured by: SEH Computertechnik GmbH Suedring 11 33647 Bielefeld Germany Phone: +49 (0)521 94226-29 Fax: +49 (0)521 94226-99 Support: +49 (0)521 94226-44 Email: info@seh. de Web: http://www. seh. de Document: Type: User Manual Title: Print Server PS Series Version: 1. 2 Online Links to important Internet Resources: Free Guarantee Extention: http://www. seh-technology. com/guarantee Support Contacts and Informationen: http://www. seh-technology. com/support Sales Contact and Informationen: http://www. seh-technology. com/sales InterCon is a registered trademark of SEH Computertechnik GmbH. SEH Computertechnik GmbH has endeavoured to ensure that the information in all manuals is correct. If you detect any inaccuracies please inform us at the address indicated below. SEH Computertechnik GmbH will not accept any liability for any error or omission. [. . . ] 9. Print Server User Manual 133 Print Server Network Authentication 10. 4 How to Configure PEAP Benefits and Purpose PEAP (Protected Extensible Authentication Protocol) validates the identity of devices or users before they gain access to network resources. You can configure the print server for the PEAP network authentication. This makes sure that the print server gets access to protected networks. In the case of PEAP (compare EAP-TTLS, see 131), an encrypted TLS (Transport Layer Security) channel is established between the print server and the RADIUS server. Only the RADIUS server authenticates itself using a certificate that was signed by a CA. The TLS channel is then used to establish another connection that can be protected by means of additional EAP authentication methods (e. g. The advantage of this procedure is that only the RADIUS server needs a certificate. PEAP uses the advantages of TLS and supports various authentication methods, including user passwords and one-time passwords. Basic Functions Requirements The print server is defined as user (with user name and password) on a RADIUS server. 'Enabling PEAP via the Print Server Homepage' 'Enabling PEAP via the InterCon-NetTool' 135 134 What do you want to do? The authentication of print server models with WLAN support is configured via the menu item Configuration - WLAN. Select Authentication. Print Server User Manual 134 Print Server Network Authentication 4. Enter the user name and the password that are used for the configuration of the print server on the RADIUS server. Select the settings intended to secure the communication in the TLS channel. To make the connection more secure, you can also install the root certificate of the RADIUS server on the print server. Enabling PEAP via the InterCon-NetTool Proceed as follows: Start the InterCon-NetTool. Enter the user name and the password that are used for the configuration of the print server on the RADIUS server. Select the settings intended to secure the communication in the TLS channel. To make the connection more secure, you can also install the root certificate of the RADIUS server on the print server. 9. Print Server User Manual 135 Print Server Network Authentication 10. 5 How to Configure EAP-FAST Benefits and Purpose EAP-FAST (Flexible Authentication via Secure Tunneling) validates the identity of devices or users before they gain access to network resources. You can configure the print server for the EAP-FAST network authentication. This makes sure that the print server gets access to protected networks. EAP-FAST uses (as in the case of EAP-TTLS, see 131) a channel in order to protect the data transfer. The main difference is that EAP-FAST does not require certificates for authentication purposes. [. . . ] 64 characters 0 = none 1 = MSCHAP 2 = MSCHAPv2 3 = PAP 4 = CHAP 5 = EAP-MD5 6 = EAP-MSCHAP 7 = EAP-MSCHAPv2 8 = EAP-TLS Print Server User Manual 244 Parameters eap_auth_extern [PEAP/EAP-FAST Options] Value 0 = none 1 = PEAP LABEL0 2 = PEAP LABEL1 3 = PEAP V0 4 = PEAP V1 5 = FAST INLINE PROVISIONING Description Defines the kind of external authentication for the EAP authentication methods PEAP and FAST. Table 36: Parameter List - Dynamic Update Parameters dyn_update [Dynamic firmware update] dyn_update_url [Update URL] dyn_proxy [Use proxy server] dyn_proxy_ur [Proxy server] Value on/off Description Enable/disables the dynamic firmware update. Defines the location of the firmware files needed for the dynamic firmware update. Enables/disables the use of a proxy server for the dynamic firmware update. Defines the URL of the proxy server used for the dynamic firmware update. max. [. . . ]