User manual SCOTT SCALE CARBON

[. . . ] SCOTT 2011 BIKE OWNERS MANUAL SCOTT SPORTS SA | 17 RTE DU CROCHET | 1762 GIVISIEZ | SWITZERLAND © 2009 SCOTT SPORTS SA, ALL RIGHTS RESERVED | SCOTT-SPORTS. COM H SCALE CARBON CONTENT Scale Carbon Concept SCALE CARBON Geometry Scale Technical Data Scale BB Standards/ FD Mounting Details The Scale Carbon bikes should be adjusted exactly to the current rider for reaching maximum safety and fun while riding. All adjustments should be done at the local Scott dealer or following to this manual. Chainguide Headset Options BB Cable Guide/Cable Routing Seattube Clamp Replaceable Rear Derailleur Hanger Rear Disc Brake Mount Front Fork Set-Up/Change of Front Fork Warranty P. [. . . ] SCALE CARBON 9 ENGLISH Ritchey WCS Carbon Zero Tapered Ritchey PRO Tapered PF 50-61mm PF 50-61mm 18mm UD 12. 9mm It is also possible to use forks with a standard 1 1/8" steerer tube when using a reducer headset such as e. g. Ritchey WCS Carbon Zero Tapered PF 50-61mm 18mm UD for 1 1/18 fork 8 2011 SCOTT BIKE OWNERS MANUAL BB CABLE GUIDE / CABLE ROUTING Scale Carbon features also an internal cable routing for front and rear derailleur. SCALE CARBON A special BB Cable Guide was developed for Scale Carbon which is available as a spare part at the Scott distribution. In case you want to replace the cables, please follow those steps: 1. Push the inner cables from the front downward inside the downtube to the BB housing. Pull them out on the related holes (RD on right side, FD on left side) on the BB housing. Rear derailleur Front derailleur Please note that the outer housing of the FD and RD cables will stop at the cable stop/ port on the front end of the down tube. 4. Push them through the related holes on the BB Guide and clip the BB Guide into the BB housing ENGLISH 5. Follow the standard set up and assembly instructions of the shifting system manufacturer for final adjustment of the shifting system 10 2011 SCOTT BIKE OWNERS MANUAL 11 SCALE CARBON SEATTUBE CLAMP Scale Carbon features two different versions of the seatpost fixation on the seattube. SCALE CARBON REPLACEABLE REAR DERAILLEUR HANGER Scale Carbon is using the same replaceable rear derailleur hanger as Scott Spark and Genius. This spare part can be ordered via the Scott distribution with article number 206473. Integrated clamp type: This fixation shaves off approx. Pleasenotethemaximumtighteningtorqueonthefixingboltof5Nm/44in/lbsto avoiddamagesonframe, clamppartsortheseatpost. Please make sure to use always the washer between the 2 clamp parts to avoid damages on the frame, seatpost or clamp mechanism. seatclamp M5 nut seatclamp washer seatclamp nut seatclamp M5 screw SCALE CARBON 13 ENGLISH Standard type: Please make sure to only use a seatclamp with an inner diameter of 38. 2mm and please note the maximum tightening torque on the fixing bolt of 5Nm/44 in/lbs 12 2011 SCOTT BIKE OWNERS MANUAL REAR DISC BRAKE MOUNT The rear disc brake on Scale Carbon is Postmount (PM) Standard on the left chainstay and optimized for 160mm/6" rotors, so the calliper can be mounted directly without adapters on the Postmount fixation. Please note Scale Carbon is designed for disc rotors between 160mm/6" and 185mm/7" (adapter needed from manufacturer of the brake)only. FRONT FORK SET-UP/ CHANGE OF FRONT FORK: For the set up of the front fork please use the fork specific manual attached to the bike. We recommend using front forks with distance of 471mm/18. 54" between mid of axle to top of crown, as this will not influence the geometry and alter handling of the bike. SCALE CARBON 15 ENGLISH SCALE CARBON 14 2011 SCOTT BIKE OWNERS MANUAL WARRANTY WARRANTY SCOTT bikes are made using the most innovative production and quality methods. They are equipped with best components of well known parts suppliers. SCALE CARBON Model Year Size This warranty of 5 years for the frames shall only be granted in case once a year a maintenance service has been effected according to maintenance requirements as set forth in this manual by an authorised SCOTT dealer. The authorised SCOTT dealer shall confirm the effected annual maintenance service by stamp and signature. Frame In case such an annual maintenance service has not been effected the warranty of 5 years for the frame shall be reduced to 3 years. Costs for maintenance and service have to be born by the owner of the SCOTT bike. [. . . ] Claims must be made through an authorized dealer, for information regarding the nearest dealer, write or call this company or the national SCOTT distributor. Normal wear, accident, neglect, abuse, improper assembly, improper maintenance by other than an authorized dealer or use of parts or devices not consistent with the use originally intended for the bicycle as sold are not covered by this warranty. Additional entitlements according to national warrant of merchantability are reserved. 16 2011 SCOTT BIKE OWNERS MANUAL 17 SCALE CARBON Doing so SCOTT warrants its frames and swingarms for five years (subject to compliance with maintenance ranges, see below) and SCOTT forks (provided it is a fork of SCOTT) for two years for defects in material and/or workmanship in case of purchase of completely assembled bikes. [. . . ]