User manual SANYO PDP-42H2A
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SANYO PDP-42H2A. We hope that this SANYO PDP-42H2A user guide will be useful to you.
Manual abstract: user guide SANYO PDP-42H2A
Detailed instructions for use are in the User's Guide.
[. . . ] Multimedia Plasma Monitor
MODEL
PDP-42H2A
Owner's Manual
TO THE OWNER
Before operating this Plasma Monitor, read this manual thoroughly and operate the Plasma Monitor properly. Operating the Plasma Monitor properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. If your Plasma Monitor seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the "Trouble-shooting" section of the end of this booklet. [. . . ] Press the ed buttons to select the menu that you want to adjust, and then press the OK button. Adjust the item by pressing the 7 8 buttons.
MAIN MENU
Picture adjustment Sound adjustment Screen adjustment Picture setup Initial setup PC mode adjustment Screen saver Information
78
Select
OK
OK
STATUS Return
M E N U Exit
Press the STATUS button to return to the previous menu display. Press the MENU button to close the On-Screen Menu.
SUB MENU
Picture adjustment
Contrast Brightness Color Tint Sharpness Noise reduction
62 32 32 0 0 Off
78
Select
OK
OK
STATUS Return
M E N U Exit
23
BASIC OPERATION
ON SCREEN MENU TREE
Picture adjustment
MENU
Picture adjustment Contrast Brightness 62 32 32 0 0 Off
(P26)
Picture adjustment Sound adjustment Screen adjustment Picture setup Initial setup PC mode adjustment Screen saver Information
Color Tint Sharpness Noise reduction
Select
OK
MENU
OK Exit
STATUS Return
Contrast Brightness Color Tint Sharpness Noise reduction
(P27)
Sound adjustment
OK
OK
Sound adjustment
78
Select
STATUS Return
M E N U Exit
78
Treble Bass Balance BBE
0 0 0 Off
Select
78
MENU
Adjust Exit
STATUS Return
Treble Bass Balance BBE
(P28)
Screen adjustment
Screen adjustment Vertical Horizontal Move 1 1 1
78
Vertical Horizontal Move
Adjust Exit
78
Select
78
MENU
STATUS Return
Picture setup
Picture setup
(P34)
Dynamic AI/Light sensor ECO mode Color temperature Flesh tone Cinema auto
AI Off Normal Off On
78
Dynamic AI/ Light sensor ECO mode Color Temperature Flesh tone Cinema auto
Select
78
Select
STATUS Return
M E N U Exit
To be continued to next page
24
BASIC OPERATION
MENU Initial setup
Picture adjustment Sound adjustment Screen adjustment Picture setup Initial setup PC mode adjustment Screen saver Information
78
Select
78
(P35)
English HDCP Off Off Setup
Initial setup
Language DVI setup Start mode No operation shut off timer Reset
Language DVI setup Start mode
No operation shut off timer
Reset
Select
STATUS Return M E N U Exit
78
Select
OK
OK
STATUS Return
M E N U Exit
PC mode adjustment
PC mode adjustment Auto setup Clock Phase Position Power save
(P30-31)
Select
OK
OK
STATUS Return
M E N U Exit
Auto setup Clock Phase Position Power save
(P36-37)
Screen saver
Screen saver Pic rotation Cycle time Dot White pattern Display time Side bar On 30 Min 20 Off 10 Min Off
78
Select
78
MENU
Select Exit
Picture rotation Cycle time Dot White pattern Display time Side bar
STATUS Return
Information
Information Temperature Cooling fan Signal OK OK VIDEO
78
(P37)
525i(480i)
STATUS Return
M E N U Exit
25
BASIC OPERATION
PICTURE ADJUSTMENT
1 2 3
Press the MENU button and the On-Screen Menu will appear. Press the ed buttons to select an item that you want to adjust, and then press the OK button. Adjust each value by pressing the 7 8 buttons.
MENU
Picture adjustment
Contrast Brightness Color Tint Sharpness Noise reduction
62 32 32 0 0 Off
NOTE : The adjusted Video and Computer values are memorized individually. Noise reduction cannot be adjusted when the input mode is "PC" or "DVI-D".
78
Select
OK
OK
STATUS Return
M E N U Exit
Select the item and then press the OK button.
Picture adjustment
Contrast
63
78
Select
78
Adjust
STATUS Return
M E N U Exit
Contrast Press the 7 button to decrease contrast, and the 8 button to increase contrast.
Contrast 63
Brightness Press the 7 button to adjust image darker, and the 8 button to adjust brighter.
Brightness 31
Color Press the 7 button to lighter color, and the 8 button to darker color.
Color 31
Tint Press the 7 or 8 button to obtain proper color.
Tint 0
Sharpness Press the 7 button to soften the image, and the 8 button to sharpen the image.
Sharpness 8
Noise reduction Press the 7 or 8 button to select "On" or "Off".
Noise reduction On
26
BASIC OPERATION
SOUND ADJUSTMENT
VOLUME
Press the VOLUME (+/) button(s) on the Remote Control Unit or the Front Control to adjust volume. Press the VOLUME (+) button to increase volume, and () button to decrease.
(green) Indicates the roughly level of volume.
9
MUTE
Press the MUTE button on the Remote Control Unit to mute sound. To restore sound to its previous level, press the MUTE button again or press the Volume (+/) button(s).
Mute 9
(red)
VIDEO COMPONENT ON-OFF
SURROUND
Press the SURROUND button on the Remote Control Unit to set the 3D surround function on/off.
PC/DVI-D PC/DVI-D
VOLUME
VOLUME button
WIDE OFF TIMER MUTE PICTURE MOVE UP
MUTE button
OK
STATUS ST TUS MOVE DOWN MENU
SURROUND button
SURROUND
AUTO PC UTO
POWER ON
SOUND ADJUSTMENT
SOUND MENU
Sound adjustment
1 2 3
Press the MENU button and the On-Screen Menu will appear. Press the ed buttons to select "Sound" menu and then press the OK button. Press the ed buttons to select an item that you want to adjust and make adjustment by pressing the 78 buttons.
Treble Bass Balance BBE
0 0 0 Off
78
Select
78
Adjust
STATUS Return
M E N U Exit
Treble Press the 7 button to decrease high frequency sound, and the 8 button to increase high frequency sound. Bass Press the 7 button to decrease low frequency sound, and the 8 button to increase low frequency sound. Balance Adjusts the volume balance of the left and right speakers.
R
BBE 3D SURROUND 9
The on-screen display when BBE is set "On" or "Bass" and Surround "On".
Mach3Bass
BBE Set "On" to provide "BBE-ON" sound, and set "Bass" to provide "BBE Mach 3 Bass-ON" sound. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
27
BASIC OPERATION
SCREEN ADJUSTMENT
ADJUSTING WIDE IMAGE
SCREEN ADJUST MENU
Screen adjustment
1 2 3
Press the MENU button and the On-Screen Menu will appear. Press the ed buttons to select "Screen adjustment" menu and then press the OK button. Press the ed buttons to select "Vertical" "Horizontal" or "Move", and adjust image by pressing the 78 buttons.
Vertical Horizontal Move
1 1 1
78
Select
78
Adjust
Adjustment data is memorized in each wide image mode. Horizontal Adjustment of horizontal expand proportion on both sides of the image. Move Adjustment of vertical position of the image.
STATUS Return
M E N U Exit
NOTE : "Vertical", "Horizontal" and "Move" may not be adjusted depending on the screen size selected. "Vertical", "Horizontal" and "Move" can not be adjusted when the input signal is PC or DVI-D.
VIDEO COMPONENT ON-OFF
UP/DOWN PICTURE
PC/DVI-D
VOLUME OFF TIMER MUTE
To directly move up/down the image vertically, press the MOVE UP / MOVE DOWN buttons.
NOTE : Up and down picture function can work only when the input signal mode is "AV1", "AV2", "AV3", "Component1" or "Component2" and the image mode is "Natural wide", "Zoom" or "Zoom(Caption-IN)".
WIDE
PICTURE MOVE UP
MOVE UP button MOVE DOWN button
OK
STATUS MOVE DOWN MENU TUS
SURROUND
AUTO PC
POWER POWER
Move +3
28
COMPUTER MODE
SELECTING INPUT SOURCE
REMOTE CONTROL OPERATION
Select "PC" or "DVI-D" by pressing the PC/DVI-D button on the Remote Control Unit. PC DVI (PC)
FRONT CONTROL OPERATION
Select "PC" or "DVI-D" by pressing the INPUT button on the Front Control of the Plasma Monitor. (Refer to P21)
SELECTING COMPUTER SYSTEM
This Plasma Monitor automatically tunes to most different types of computers based on VGA, SVGA or XGA (refer to "COMPATIBLE COMPUTER SPECIFICATIONS" on page 32). When selecting PC for the input mode, this Plasma Monitor automatically detects the incoming signal and displays a proper image without any special setting. (Some computers need manual setting. ) If the Monitor may not be able to display a proper image, the following messages will be displayed.
Out of scan range
When the Plasma Monitor detects any signal out of the system formats provided in the Compatible Computer Specifications on page 32 of this manual, the message "Out of scan range" will be displayed for a few seconds. [. . . ] Do not attempt to open the cabinet.
If the problem still persists after following all operating instructions, contact the sales dealer where you purchased the Plasma Monitor or the service center. We will advise you how to obtain service.
FUNCTIONS OF PRODUCT SAFETY FEATURES
For protecting product safety, protection features provided inside the Plasma Monitor. Each feature operating as follows ;
COOLING FAN
When the temperature of inside the Plasma Monitor becomes high, the cooling fans start operating automatically to cool down the Plasma Monitor. The fan's running speed is changed according to the inside temperature of the Plasma Monitor. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SANYO PDP-42H2A
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SANYO PDP-42H2A will begin.