User manual SANGEAN WFR-20

[. . . ] 28-29 Set up a Windows PC to allow the radio to access your audio files via a UPnP server. Read and understand all safety and operating instructions before the radio is operated. Retain instruction: The safety and operating instructions should be retained for future reference. Do not use near a bathtub, washbowl, laundry tub, kitchen sink, wet basement, swimming pool, etc. [. . . ] Set up a Windows PC to allow the radio to access your audio files via a UPnP server 1. If your PC is running Microsoft Windows XP or Windows Vista then you can use Microsoft's Windows Media Player 11 (WMP 11) to act as your UPnP (Universal Plug and Play) media server. If not already installed on your PC, Windows Media Player 11 may be downloaded from Microsoft's website and installed by following the instructions detailed in its installation wizard, or by using Microsoft's Windows Update facility. Once installed, WMP 11 can create a library from all the media files available to it on your PC. to add new media files to the library , select `File > Add to Library. > Advanced Options', click `Add' and choose the files you wish to add and click `OK'. You will now need to connect your Internet radio to Windows Media Player 11 and configure it to allow the radio to access your media library. Note, this may take a few seconds for the radio to complete its scan and before the scan has completed, the radio will display `Empty'. After scanning, select your UPnP server (rotate the Select control if more than one UpnP server is found), and then press the Select control. Your PC may now prompt you that a device has attempted to connect to your UPnP server. Whether you are prompted or not, in order to allow the radio to have access to the media files, you will need to click the `Library' tab in WMP 11 and select the `Media Sharing. From the `Media Sharing' window, the radio will be listed as an unknown device. Click on the unknown device shown to select it, then click the `Allow' button and then click `OK'. Note: If you are using Microsoft Windows' firewall software, this should be correctly configured by WMP 11. If you are using third party firewall software you may need to manually configure it to allow your radio and WMP 11 to communicate (see 'Troubleshooting'). If WMP 11 is now able to communicate with your radio you will be presented with some media selection options by the server software. Locating and playing media files when using UPnP Once the UPnP server has been configured to share media files with your Internet radio, you select the files that you wish to play as follows: 1. Use the Select control to switch on your radio and to access the menus. Note that it may take a few seconds for the radio to complete its scan, and that before the scan has completed the radio may display `Empty'. After a successful scan, rotate the Select control to highlight your UPnP server and then press the Select control. The radio will now list the media categories which are made available by the UPnP server - for example, `Music' and `Playlists'. Rotate the Select control to highlight which category you wish to browse, then press the Select control to confirm your choice. [. . . ] Rotate the Select control to highlight `Yes' if you wish to carry out a system reset or highlight `No' if wish to return to the previous screen. A full reset will be performed, the station list together with any preset stations will be erased and your wireless network connection details will be lost. All configuration settings will be restored to their defaults, and the language used for menus will be reset to English. In the event that you are unable to access the menus (or if the language setting has accidentally been changed to a language that you cannot understand) the Factory Reset may also be performed as follows: 1. [. . . ]