User manual SANGEAN PT-50

[. . . ] These additives can corrode the device supports, leaving residues on the furniture surfaces which can be difficult or impossible to remove. Warranty claims are excluded for damage resulting from improper handling. As little material as possible was used in the packaging of your device. [. . . ] When you first switch on the device, or if it has been without a power supply for a lengthy period, »HOME« and »- : --« appear in the display. the time zone code , for example »5« , flashes to indicate that the clock has to be set. 5 Press »12/24« to switch between 12 and 24 hour clock format. 1 Hold down »TIME SET« until the time flashes in the display. 2 Press »H/W SUMMER« to put the clock forward by one hour. 1 Hold down »TIME SET« until the time flashes in the display. 1 Press »12/24« to switch between 12 and 24 hour clock format. Before you set the alarm time, you must select the alarm signal (radio station or signal tone). ­ Display: » « or » « flashes for two seconds and then remains lit. 3 Hold down »ALARM SET« until the alarm time flashes in the display. Notes: For FM reception pull out the telescopic antenna and tilt it until you receive the best signal. 5 mm, stereo) into the »0« jack on the left of the device. If the signal from the FM stereo station is weak, you can improve the sound quality by switching to mono reception. The device possesses a sleep timer, which switches it off in radio mode at a preset time. [. . . ] If you want to listen to a particular SW station, you need to know the precise frequency and wavelength. Many short wave stations will send you broadcasting schedules which give you the information you need. This device is noise-suppressed according to the applicable EU directives. [. . . ]