User manual SAMSUNG CTR164NC01

[. . . ] CTR164TC Series CTR164EC Series CTR164NC Series CTR164DC Series CTR164AC Series CTR164KC Series Ceramic Glass Hob user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at ENGLISH www. samsung. com/register This manual is made with 100% recycled paper. CTR164NC01_XSA_00338A-EN. indd 1 2011-01-19 4:08:44 using this manual Please take the time to read this owner's manual, paying particular attention to the safety information contained in the following section, before using your appliance. If transferring ownership of the appliance, please remember to pass the manual on to the new owner. IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS. The following symbols are used in the text of this Owner's Manual : WARNING CAUTION CAUTION Hazards or unsafe practices that may result in severe personal injury or death. Hazards or unsafe practices that may result in minor personal injury or property damage. [. . . ] The appliance also works perfectly on networks with AC 220 V~ or AC 240 V~. The hob is to be connected to the mains using a device that allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm, eg. A type H05RN - F cable or one of a higher grade must be used as the mains connecting cable. Rated current of appliance (A) 1N~ 2N~ > 25 and 32 > 10 and 16 Nominal cross-sectional area (mm2) 2. 5 1. 5 WARNING Shut off power to circuit before connecting wires to circuit. INSTALLING THE HOB The connection must be carried out as shown in the diagram. The connecting links should be fitted according to the appropriate connection diagram. The earth lead must be longer than leads carrying electric current. WARNING The cable connections must be made in accordance with regulations and the terminal screws tightened securely. The connecting cable is to be secured with the mains cable cleat and the covering closed by pressing firmly (locking into place). Before switching on for the first time, any protective foil or stickers must be removed from the ceramic glass surface. WARNING Once the hob is connected to the mains supply, check that all cooking zones are ready for use by briefly switching each on in turn at the maximum setting with suitable cookware. When the hob is powered on for the first time, all displays light and the child safety lock is activated. 220-240V ~ 380-415V ~ 220-240V ~ 220-240V ~ < IN ~ > L: Brown N: Blue PE: Green WARNING Pay attention (conformity) to phase and neutral allocation of house connection and appliance (connection schemes); otherwise, components can be damaged. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. WARNING installing the hob _13 CTR164NC01_XSA_00338A-EN. indd 13 2011-01-19 4:08:46 INSTALLING INTO THE COUNTERTOP Make a note of the serial number on the appliance rating plate prior to installation. This number will be required in the case of requests for service and is no longer accessible after installation, as it is on the original rating plate on the underside of the appliance. Pay special attention to the minimum space and clearance requirements. Secure the brackets at both sides with the provided screws before mounting the hob onto the brackets. Min. 20 90 ° 490±1 600 50 14_ installing the hob CTR164NC01_XSA_00338A-EN. indd 14 2011-01-19 4:08:46 90 ° x 4 ø2 INSTALLING THE HOB = 100 100 ±1 490 = installing the hob _15 CTR164NC01_XSA_00338A-EN. indd 15 2011-01-19 4:08:46 parts and features COOKING ZONES Single cooking zone 1300 W Casserole cooking zone 2540 W 148 mm 265 mm 170 mm 12 2 9/ 15 m m 14 8m m Control panel Double cooking zone 2360 W Single cooking zone 1300 W CONTROL PANEL Indicators for Heat settings and residual heat Double cooking zone control sensor Casserole zone control "Lock" control sensor sensor Timer indicator and control sensor Cooking zone selectors Setting control sensor (Slide control) On/Off control sensor 16_ parts and features CTR164NC01_XSA_00338A-EN. indd 16 2011-01-19 4:08:46 COMPONENTS PARTS AND FEATURES Ceramic Glass Hob Installation Brackets Screws THE KEY FEATURES OF YOUR APPLIANCE · · · · · · · · · Ceramic glass cooking surface: The appliance has a ceramic glass cooking surface and four rapid - response cooking zones. The hob's powerful radiant heater elements significantly shorten the amount of time required for the zones to heat up. Touch control sensors: Your appliance is operated using touch control sensors. Easy cleaning: The advantage of the ceramic glass cooking surface and the control sensors is their accessibility for cleaning. On/Off sensor: The "On/Off" control sensor provides the appliance with a separate mains switch. Control and function indicators: Digital displays and indicator lights provide information about settings and activated functions, as well as the presence of residual heat in the various cooking zones. Safety shutoff: A safety shutoff ensures that cooking zones switch off automatically after a period of time if the setting has not been changed. Residual heat indicator: An icon for residual heat appears in the display if the cooking zone is so hot that there is a risk of burning. Double cooking zone: The cooking surface features a double cooking zone. This provides the appliance with a cooking zone of variable size, for instance, for when cooking with smaller cookware. [. . . ] Avoid spilling acidic liquids, for example, vinegar, lemon juice and descaling agents, onto the hob frame, since such liquids can cause dull spots. If sugar or a preparation containing sugar comes into contact with a hot cooking zone and melts, it should be cleaned off immediately with a kitchen scraper while it is still hot. Keep all items and materials that could melt, for example, plastics, aluminium foil and oven foils, away from the ceramic glass surface. If something of this nature melts onto the hob, it must be removed immediately with a scraper. · · · · 30_ cleaning and care CTR164NC01_XSA_00338A-EN. indd 30 2011-01-19 4:08:51 warranty and service FAQS AND TROUBLESHOOTING A fault may result from a minor error that you can correct yourself with the help of the following instructions. [. . . ]