User manual SAMSUNG NP350E5C-A01

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SAMSUNG NP350E5C-A01. We hope that this SAMSUNG NP350E5C-A01 user guide will be useful to you.


SAMSUNG NP350E5C-A01 : Download the complete user guide (24701 Ko)

Manual abstract: user guide SAMSUNG NP350E5C-A01

Detailed instructions for use are in the User's Guide.

[. . . ] Heat on the top of the PDP Display The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the product. This is normal and does not indicate any defect or operation failure of the product. However, children should be prevented from touching the upper part of the product. A `cracking' noise may occur when the product contracts or expands due to a change of surrounding environment such as temperature or humidity. [. . . ] ) button. 3 Move Enter Return Press the ENTER ( 4 Press the . . . Result: The PC menu is displayed. PC Image Lock Position Auto Adjustment Image Reset Zoom 5 6 Press the . . . 0-1-2-3 -4 -5 -6 Move Enter Return Zoom Zoom Position Reset :0 0 1 2 3 4 5 6 Move Enter Return Option 0 represents a normal screen. You can select the position and reset functions by selecting options 1 through 6. (If you select option 0, the position and reset functions are not selected. ) If you have selected the Zoom function as between 1~6, you will not be able to select the Auto Adjustment function. 7 8 Press the ENTER ( ) button. Zoom Zoom Position Reset :1 Press the . . . Press the MENU ( Result: ) button. 9 10 The Zoom menu is displayed again. Move Enter Return 11 To return the factory defaults, select Reset by pressing the . . . Result: The previously adjusted settings will be reset to the factory defaults. Zoom Zoom Position Reset :1 12 Press the EXIT button to exit. Move Enter Return English - 20 Selecting the Picture Size You can select the picture size which best corresponds to your viewing requirements. Mode Picture : Dynamic : 16:9 1 Press the MENU ( Result: ) button. Color Control Size PIP The main menu is displayed. 2 Press the . . . ) button. Size 16:9 Wide 4:3 Zoom 4:3 Move Enter Return 3 4 5 Press the ENTER ( Press the . . . 16:9 Wide 4:3 Move Enter Return Zoom 4:3 PC to DVI Mode Size 16:9 Wide 4:3 Zoom 4:3 6 7 Press the ENTER ( Press the EXIT button to exit. You can select these options simply by pressing the P. SIZE button on the remote control. If you change the picture size when PIP is On, PIP will automatically be turned Off. PC and DVI modes, only 16:9 & 4:3 modes can be selected. Move Enter Return Positioning and Sizing the screen using Zoom Resizing the screen using the Zoom enables the positioning and sizing of the screen to up/down direction using the . . . 9: Enter PIN Return Change PIN Enter PIN * * * Enter New PIN * 0 . . 9: Enter PIN Return English - 27 Setting the MDC (Multiple Display Control) This function enables you to easily control the connected PDP Displays on the PC by specifying IDs to connected PDP Displays. Function Screen Burn Protection Safety Lock Multi Control Video Wall Fan : Off 1 Press the MENU ( Result: ) button. The main menu is displayed. 2 Return Press the or button to select Function. ) button. Move Enter 3 Multi Control ID Setup ID Input : : 00 -- Press the ENTER ( 4 5 Press the or button to select Multi Control. Press the ENTER ( Result: ) button. The Multi Control menu is displayed with the ID Setup selected. 6 Move Enter Return Press the ENTER ( ) button again. Press the EXIT button to exit. 7 Multi Control ID Setup ID Input : : 00 -- 8 9 Move Enter Return Multi Control ID Setup ID Input : : 00 -- To operate the multi control function, PDP1 and PDP2 should be set in the ID Setup mode. When entering the ID Input number of PDP1 while the PDP Display is set in the ID Input mode, only PDP1 is switched to the Menu screen and you can operate the remote control. At this time, PDP2 doesn't operate with the remote control and displays the standby mode of ID Input. You can select these options by simply pressing the MDC (Multiple Display Control) button on the remote control. Refer to the following Web site for information about MDC programs and protocol documents: http://www. samsung. com/support/productsupport/downloa d/index. aspx 0 . . 9: Enter ID Input Number English - 28 Preventing Screen Burn-in To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot). [. . . ] A new settings dialog box will be displayed. 4 Click on the Monitor tab, then set the Screen 2 3 refresh rate with reference to the Display Modes Table. Set the Vertical Frequency and Horizontal Frequency individually if you can do so instead of setting the Screen refresh rate. 5 Click on OK to close the window, then Click on OK button to the Display Properties window. Automatic re-booting may commence at this moment. 6 Shutdown the PC, and connect it to your PDP Display. ("Connecting to the PC Input" on page 42) 4 5 The actual screens on your PC may look different, depending on your particular version of Windows and the type of your PC. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SAMSUNG NP350E5C-A01




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SAMSUNG NP350E5C-A01 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.