User manual SABA S 32 TNV 08

[. . . ] â· 100 programmes from VHF, UHF bands or cable channels can be preset. It has two scart sockets for external devices (such as video, video games, audio set, etc. When no valid signal is detected, after 5 minutes the TV switches itself automatically to standby mode. Do not unplug the appliance by pulling from the power cord and never touch the power cord with wet hands as this could cause a short circuit or electric shock. [. . . ] After factory settings are loaded, "First Time Installation" menu will be displayed. The menu which is displayed for language selection appears on the screen at first. By using or buttons, select the desired language option, and press OK button to activate. After the language is selected, a message asking for automatic search appears on the screen: Select your Country, Language and Text language by using or and / buttons. Press MENU button to display the main menu and the button twice to highlight Configuration, then press OK button to display the Configuration menu. After search is completed for digital channels, a message asking whether to search for analogue channels appears on the screen: Do you want to search for analogue channels?The various configuration functions are displayed in a list, along with a quarter-screen image of the currently selected channel. You can select a function by highlighting the corresponding menu line using the or buttons. If the channel that you are watching supports AC3 Audio, turn this setting on. Use or button to select Hard of Hearing and then press or button to set this setting as On or Off. If the broadcaster enables any special signal concerning the audio, you can set this setting as On to receive such signals. If the "Favourite Mode" is set On by selecting a channel list number, pressing P/CH+ and P/ CH- buttons in normal operating mode will only navigate through the channels that were previously defined as favourites in the selected channel list. This feature enables navigation only through the selected channel list type. If "Radio only" is set, you can only navigate through the Radio channels in the channel list by using P + or P - buttons. Digital terrestrial television channels can broadcast simultaneous sountracks in more than one language. This function selects which language soundtrack you will hear when switching to a channel broadcasting with the multiple soundtracks. Some channels broadcast material which you do not want younger members of the family to watch. Any channel can be `locked' so that it cannot be selected for viewing unless a fourdigit PIN code is entered. In this way any channel not suitable for younger viewers can be prohibited. A dialog box asking for the lock key is displayed: Digital terrestrial television channels can broadcast with subtitles displayed on the screen for hard-of-hearing people. This function selects the desired subtitle language and enables the automatic display of subtitles whenever subtitle information is broadcast. Use or buttons to cycle through "Off" and There is only one key which is set to "0000" initially. [. . . ] Teletext function buttons are listed below: Teletext On-Off / PAT Mode Activates teletext mode when pressed once. Pressing this button again will split the screen into two windows, one displaying the teletext and the other displaying the current channel. coloured Buttons (RED/GREEN/YELLOW/BLUE) Your TV supports both FASTEXT and TOP text systems. When these systems are available, the pages are divided into groups or topics. [. . . ]