User manual RUSSOUND ISK3

[. . . ] Safety Precautions For your safety, please read and follow these precautions before installing or using this product: Technical Specifications User control: Call button with amber backlight Audio input: Built-in microphone with automatic gain control Amplifier: Monaural (for system functions only) Amplifier power: 2 watts Volume control: Installer-adjustable potentiometer Audio output: Built-in speaker Cover plate: Weatherproof plated die-cast zinc CAT-5 connector: 110 punch-down block Doorbell connector: 2-pole screw terminal Doorbell wire size: Up to 18 AWG (1. 024 mm) Doorbell contact: 1 A @ 12 VDC Power consumption: 15 VDC 220 mA maximum Dimensions: 3" W x 5. 125" H x 3. 25" D (7. 6 x 13. 0 x 8. 3 cm) Wall box required: Single-gang, 22 cu in (360 cm2) min Weight: 8 oz (227 g) ISK3 Door Station Instruction Manual Product Overview The ISK3 Door Station is a flush-mounted weatherproof call station for the ComPointTM intercom system. It features an amber-backlighted Call button and a solid metal cover plate available in three finish options. The Door Station includes an internal microphone with automatic gain control along with a built-in amplifier and speaker for reliable, high-quality two-way communication with ComPoint keypads inside the house. [. . . ] Have the product serviced only by qualified service personnel when: · Liquids have spilled or objects have fallen into the product · The product doesn't appear to operate normally · The product is damaged Don't attempt to service the product yourself. Doing so will void the warranty. Warranty The Russound ISK3 Door Station is fully guaranteed for two (2) years from the date of purchase against all defects in materials and workmanship. For this warranty to apply, the unit must be installed and used according to its written instructions. During this period, Russound will replace any defective parts and correct any defect in workmanship without charge for either parts or labor. Accidental damage and shipping damage are not considered defects under the terms of this warranty. Russound assumes no responsibility for defects resulting from abuse or servicing performed by an agency or person not specifically authorized in writing by Russound. Damage to or destruction of components due to excessive power voids the warranty. To return for repairs, the unit must be shipped to Russound at the owner's expense, along with a note explaining the nature of the service required. Be sure to pack in a corrugated container with at least 3 inches of resilient material to protect the unit from damage in transit. Before returning a unit for repair, call Russound at 603. 659. 5170 for a Return Authorization number. Write the RA number on the shipping label and ship to: Russound, 5 Forbes Road, Newmarket NH 03857. Russound sells product only through authorized dealers and distributors to ensure that customers obtain proper support and service. Any Russound product purchased from an unauthorized dealer or other source, including retailers, mail order sellers and online sellers will not be honored or serviced under existing Russound warranty policy. Any sale of products by an unauthorized source or other manner not authorized by Russound shall void the warranty on the applicable product. 1 2 3 If you have any questions, call Russound at 1-800-638-8055 or 603-659-5170. 5 Forbes Road, Newmarket NH 03857 USA Tel 603. 659. 5170 · Fax 603. 659. 5388 www. russound. com Copyright © 2007 Russound. 28-1214 Revision 1 04/13/07 1 MICROPHONE AND SPEAKER ­ Support two-way communication with interior keypads CALL BUTTON ­ Rings doorbell and initiates communication WEATHERPROOF COVER PLATE ­ Protects internal circuits and components 2 3 When running CAT-5 and control cables, avoid running them near AC power wiring as much as possible. If you have to run the cables parallel to electrical wiring, space the cables at least two feet (0. 6 m) from the AC power lines. Speaker Volume Adjustment Use the potentiometer to adjust the speaker volume. [. . . ] With its own gasketed weather-resistant front plate, it needs no other protection. Doorbell Transformer Doorbell Wiring ComPoint system components interconnect with CAT-5 cable. If you are installing optional ISDR1 Door Strike Release Modules, loop the door station cables through the module locations. To use a separate doorbell system instead of the doorbell built into the ComPoint system, run 2-conductor cable from each door station to the doorbell system. Connection to typical doorbell system [. . . ]