User manual RUSSOUND EZB-2SC
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual RUSSOUND EZB-2SC. We hope that this RUSSOUND EZB-2SC user guide will be useful to you.
Manual abstract: user guide RUSSOUND EZB-2SC
Detailed instructions for use are in the User's Guide.
[. . . ] INSTRUCTIONS FOR CONNECTING RUSSOUND EZ-BLOCK
The Russound EZ-BLOCK is fully guaranteed for ten (10) years from the date of purchase against all defects in materials and workmanship. For this warranty to apply, the unit must be installed and used according to its written instructions. [. . . ] Any Russound product purchased from an unauthorized dealer or other source, including retailers, mail order sellers and online sellers will not be honored or serviced under existing Russound warranty policy. Any sale of products by an unauthorized source or other manner not authorized by Russound shall void the warranty on the applicable product.
LIMITED WARRANTY
Models EZB-1SC, EZB-2SC
EZ-BLOCK Modular Speaker Connecting Block
1 WIRING INSTRUCTIONS MOUNTING
The EZ-BLOCKS are designed for surface mount applications. Position the EZ-BLOCK in an area close to the amplifier and volume control wiring. The EZ-BLOCK has removable modular connectors that provide color-coded wire termination without the need for set-screws. Strip about 3/8" of insulation from the ends of all wires to be connected. If necessary, twist the exposed conductor to insure that no loose strands exist. Remove the AMP INPUT connector by pulling up away from the board on the connector. Insert the wires from the amplifier speaker level output, being careful to observe proper polarity, and lower the lever with a "snap. " In the same way, connect each volume control to the appropriate SPEAKER connector. Each pair of speakers will then connect to the impedance-matching volume control.
3
Instruction Manual
DESCRIPTION
NOTE: This unit in and of itself provides no impedance matching. It is designed to be used in systems utilizing impedance -matching volume controls.
2 ADDING EZB-2SC SECTIONS
An EZB-2SC allows for the connection of an additional 4 volume controls. To connect the EZB-2SC to the existing EZB-1SC, line up the male pin header on the end of the EZB-2SC with the female pin socket of the EZB-1SC. Make sure the two connectors line up properly; there should not be any pins extending beyond the end of the female connector. [. . . ] Accepts up to 14-gauge wire 1. 75"W x 0. 75"H x 4. 25"D (45x19x108mm) 1lb. DIAGRAMS ARE NOT TO SCALE.
EZB-1SC Amplifier Speaker wire
EXPANSIONS
Top view
EZB-2SC
RUSSOUND RUSSOUND
SPEAKERS SPEAKERS SPEAKERS SPEAKERS
RUSSOUND
SPEAKERS
EXPANSIONS
SPEAKERS
SPEAKERS SPEAKERS
1
IN
Speaker wire
2
Side view Impedance-matching volume control (Russound ALTx-2sc)
WHITE -- L+ (left channel positive) GREEN -- L- (left channel negative) BLACK -- R- (right channel negative) RED -- R+ (right channel positive)
Speaker wire
Speakers
SPEAKERS SPEAKERS
SPEAKERS SPEAKERS
INPUT
INPUT
3
SPEAKERS [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE RUSSOUND EZB-2SC
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual RUSSOUND EZB-2SC will begin.