User manual RUSSOUND DIM-1

[. . . ] DIM-1 Instruction Manual Doorbell Interface Module POWER DOORBELL INTERFACE TRIG TRIG OUT +12VDC TRANS DB3 DB2 DB1 Product Overview The DIM-1 Doorbell Interface Module's primary purpose is to mute a multisource/multi-zone audio system so a preexisting doorbell can be heard when it rings. The DIM-1 does not generate an audible chime, but provides a six-second 12V trigger to the multi-zone system which is used to mute the system so the doorbell can be heard. The DIM-1 connects the Russound CA4. 4i, CA6. 4i, CAV6. 6 and the PR-4Zi multi-zone systems to the doorbell of the home by a few simple connections. Installation Instructions DIM-1 installation requires an existing doorchime with door button that operates on 12-18VAC or DC. [. . . ] The wire from the tip (+) connects to the "TRIG OUT (+)" (-) Sleeve terminal of the DIM-1. The other wire from the sleeve (-) connects to the "TRIG OUT (-)" of the DIM-1. Refer to Figure 2. POWER DOORBELL INTERFACE TRIG TRIG OUT +12V DC Figure 2 (+) Tip 4a) PR-4Zi Connection: For operation with the PR-4Zi, connect the 1/8" mini plug into the Mute Input connection. 4b) CAi Series Connection: For operation with the CA4. 4i/CA6. 4i, connect the 1/8" mini plug into the Mute Input connection. 4c) CAV Series Connection: For operation with the CAV6. 6, connect the 1/8" mini plug into the Page Trigger Input connection. Refer to Figure 5. POWER DOORBELL INTERFACE POWER DOORBELL INTERFACE POWER DOORBELL INTERFACE TRANS TRANS DB3 DB2 DB1 DB3 DB2 DB1 TRIG OUT TRIG OUT +12V DC TRIG TRIG TRIG TRIG OUT +12V DC +12V DC Figure 3 (-) Sleeve (+) Tip Figure 4 (-) Sleeve (+) Tip MUTE IN OUT Figure 5 (-) Sleeve (+) Tip PR-4Zi CAi Series CAV6. 6 TRANS DB3 DB2 DB1 TRANS DB3 DB2 DB1 Operating Instructions 1) Power the doorbell system and your audio distribution system. The green LED on the DIM-1 should illuminate for 6 seconds and then go out. The audio should mute for 6 seconds and then return. Limited Warranty The Russound DIM-1 is fully guaranteed against all defects in materials and workmanship for two (2) years from the date of purchase. During this period, Russound will replace any defective parts and correct any defect in workmanship without charge for either parts or labor. For this warranty to apply, the unit must be installed and used according to its written instructions. The unit must be returned to Russound at the owner's expense and with prior written permission. Accidental damage and shipping damage are not considered defects, nor is damage resulting from abuse or from servicing by an agency or person not specifically authorized in writing by Russound. This Warranty does not cover: Damage caused by abuse, accident, misuse, negligence, or improper installation or operation; Power surges and lightning strikes; Normal wear and maintenance; Products that have been altered or modified; Any product whose identifying number, decal, serial number, etc. Russound sells products only through authorized Dealers and Distributors to ensure that customers obtain proper support and service. [. . . ] Before returning a unit for repair, call Russound at (603) 659-5170 for a Return Authorization number. Write this number on the shipping label and ship to: Russound, ATTN: Service, 5 Forbes Road, Newmarket, NH 03857 5 Forbes Rd. Newmarket, NH 03857, USA 603. 659. 5170 · Fax 603. 659. 5388 e-mail: tech@russound. com Rev. [. . . ]