User manual RUSSOUND 858P PLASMA IN-WALL

[. . . ] 6 5 EMITTERS 857 INFRARED CONNECTING BLOCK IR CONFIRM 4 3 2 1 LIMITED WARRANTY The Russound 858P Plasma In-Wall IR Receiver is fully guaranteed for two (2) years from the date of purchase against all defects in materials and workmanship. For this warranty to apply, the unit must be installed and used according to its written instructions. [. . . ] Before returning a unit for repair, call Russound at (603) 659-5170 for a Return Authorization number. Write the RA number on the shipping label and ship to: Russound, ATTN: Service, 5 Forbes Road, Newmarket NH 03857 Russound sells product only through authorized Dealers and Distributors to ensure that customers obtain proper support and service. Any Russound product purchased from an unauthorized dealer or other source, including retailers, mail order sellers and online sellers will not be honored or serviced under existing Russound warranty policy. Any sale of products by an unauthorized source or other manner not authorized by Russound shall void the warranty on the applicable product. Decora® is a trademark of Leviton Corporation e-mail: tech@russound. com 08/12/04 Patented 5 Forbes Rd. Newmarket, NH 03857, USA Tel 603. 659. 5170 · Fax 603. 659. 5388 The 858P Plasma In-Wall can be connected to the 857 connecting block using shielded 2-twisted pair wire (AW2260AB). Connect the shield or drain to the ground at the connecting block ONLY, leaving the shield or drain disconnected at the 858P. · Plasma-friendly - can be placed near plasma TVs and displays. · CFL-friendly - allows installations in areas with compact fluorescent lighting. Receives IR from many types of remotes. SaphIR 858P Plasma In-Wall Decora® Style Infrared Receiver Plasma and CFL Friendly Instruction Manual IR RECEIVER · · · · The 858P Plasma In-Wall IR Receiver receives IR signals from a handheld IR remote control and relays these signals to the audio/video equipment for operation from another room. [. . . ] When the receiver is on, the power supply will turn on the system status line and illuminate the LED Green of the 858P Plasma In-Wall. The status line can be turned on or off by setting the jumper on back of the 858P Plasma Wall as shown in Figure 4. SPECIFICATIONS Receive Frequency: 36kHz to 58kHz Transmit Frequency: 40kHz and 56kHz Range: On Axis ­ 55ft to 80ft 30º Off Axis ­ 30ft to 55ft Power: 12VDC 31mA max Status Power: 12VDC 3mA max Wire requirements: 2 twisted pair, with or without shield Dimensions: 1 3/4"W x 4 5/16"H x 3/8"D Weight: 1/2oz Figure 5 EMITTER PORTS 2 EMITTERS 3 4 5 6 857 INFRARED CONNECTING BLOCK IR CONFIRM 1 2 EMMITERS 3 4 5 6 [. . . ]