User manual ROSIERES RHV 9102

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ROSIERES RHV 9102. We hope that this ROSIERES RHV 9102 user guide will be useful to you.


ROSIERES RHV 9102 : Download the complete user guide (4401 Ko)

Manual abstract: user guide ROSIERES RHV 9102

Detailed instructions for use are in the User's Guide.

[. . . ] Mark the first 2 holes to be drilled in the wall, respecting the distances indicated in Fig. Bear in mind that the distance between the lower edge of the hood and the hob must be 350 mm. Fix the metal bracket (A) to the wall using the 2 holes just drilled (Fig. [. . . ] When pressing the key when the motor is running, the TIMER is activated and the hood will automatically be switched off after 5 minutes. When the LED is green (flashing) it indicates that the TIMER has been activated with the key E. After 120h of operation, the LED L2 turns RED and flashes; It indicates that the grease filters need to be cleaned and the charcoal filters replaced. After cleaning the grease filters (and/or replacing the charcoal filters), restart the hour counter (RESET) by pressing the key E during display of the filter alarm. 19: P1) OFF/- Lights: Decreases light intensity down to minimum intensity. P2) ON/+ Lights: Switches on the lights using the last brightness level set (prior to the last time the lights were switched off). if pressed for 2 seconds when FILTER ALARM is active , HOUR metering is reset. P4) ON/+ Engine: Switches on the engine using the speed set (prior to the last time the engine was switched off). Increases the speed of the engine up to maximum speed (NON INTENSIVE). If pressed for 2 seconds, the 5-minute Timer is activated and HIGHLIGHTED by flashing speed indication LEDs. If pressed once, it activates the FIRST intensive speed; if pressed for a second times, the SECOND intensive is activated; if pressed for a THIRD time, the speed set prior to the intensive (that is one of the first 4) is set again. l2) 2-colour LED: GREEN indicates the First Intensive Speed RED indicates the Second Intensive Speed. FILTER ALARM: After 30h of operation, the first 2 leds (L1) flash; it indicates that the grease filters need to be cleaned. After 120h of operation, - the last 2 leds (L1) flash; It indicates that the grease filters need to be cleaned and the charcoal filters replaced. After cleaning the grease filters (and/or replacing the charcoal filters), restart the hour counter (RESET) by pressing the key P3 during display of the filter alarm. D) Drives the motor (calling the last speed used) and increases the speed until reaching maximum. [. . . ] The running speed and not the letter "A" must appear on the display); If not, press the key E. By means of the buttons C(-) and D(+) the desired sensitivity is set Store the "new" sensitivity by pressing the key E. aTTENTION: TO PREVENT DAMAGING THE SENSOR , DO NOT USE SILICONE PRODUCTS NEAR THE HOOD! [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ROSIERES RHV 9102




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ROSIERES RHV 9102 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.