User manual ROSIERES RHG 5211 IN

[. . . ] Check the data label inside the appliance; if the symbol ( ) is printed, read the following: this appliance has such technical particulars that it belongs to class II insulation, therefore it must not be earthed. [. . . ] 4: remove the filter/s by moving fastener (B) and turning the filter outwards. afterwards , remove the metal grid by moving the 2 side fasteners (C). Cut a hole in the bottom of the pensile cupboard in order to settle the appliance (Fig. 6 to the wall unit are positioned at a height suited to the thickness of the bottom of the wall unit. If this distance is less than the thickness, increase it by unscrewing the 2 corresponding screws inside the hood. Use a flexible pipe and lock it to the air evacuation pipe of the hood with a metal hose clamp (pipe and clamp are not provided). 6); move the 2 tangs toward the devce inside using the right carvings (Fig. InstAllAtion in filterinG Version: Proceed with installation, making reference to the instructions for the extraction version (see points 2, 3, 4, 5), and then follow the instructions below. [. . . ] La distance minimum entre la surface de support des casseroles sur le plan de cuisson et la partie inférieure delahottedoitmesurer65cm, saufsilesinstructionspourl'installationsontdifférentes. [. . . ]