User manual ROSIERES RCI647IN

[. . . ] Screw the adjustable feet F supplied (the foot is made up of two parts screwed to each other, so that the height of the foot can be adjusted if necessary, allowing the structure to be set perfectly level) onto screws D (6 screws for the 1200mm model, 4 screws for the 900mm one). [. . . ] : The oven supports G are supplied ready-mounted, but they can be adjusted in height as follows: a. Position the two oven supports G at the height required and fix them into the new position using the screws provided. Fix the support so that when the oven is mounted there is a minimum space of 5 mm between the top side of the oven and the underneath side of the cooker top, so as to allow a flow of air to cool the oven. Affix the frontal lower cabinet panel K to the cabinet with 4 screws (the panel may be fixed in various depths according to needs, therefore diverse drill holes L are provided). Replace the drawers in the cabinet (by blocking the drawers via the drawer block C for the 1200mm model or fix the drawers to the screws V on the track Z ­ fig. Schroef op de schroeven D (6 schroeven voor het model van 1200 mm, 4 schroeven voor het model van 900 mm) de bijgeleverde stelpootjes F (het pootje bestaat uit twee op elkaar geschroefde delen, hierdoor is het indien nodig mogelijk de hoogte van het pootje te regelen en kan de structuur perfect waterpas worden gezet). [. . . ] Replace the drawers in the cabinet (by blocking the drawers via the drawer block C for the 1200mm model or fix the drawers to the screws V on the track Z ­ fig. [. . . ]