User manual ROSIERES HO 3060

[. . . ] Declaration of compliance: the parts of this appliance that may come into contact with foodstuffs comply with the provisions of EEC Directive 89/109. This appliance complies with Directives 89/336/EEC, 73/23/EEC and following changes. Electrical connection This refrigerator is set to work at the nominal voltage indicated on the rating plate inside the product. Voltage fluctuations should not be greater or less than 10% of the nominal voltage. [. . . ] If the red indicator light "B" comes on, it means that the temperature in the freezer compartment is not low enough. This may be due to: - the appliance having only just been switched on - the door having been left open, or not having been properly closed - food having been put in for freezing. The red indicator light goes out when the selected temperature has been reached. 13) FOR FRIDGE FREEZER WITH 2 COMPRESSORS Thermostat "A" controls the freezer, turn the dial clock-wise and the freezer will turn on and the green led "B" and red LED "C" will switch on. The red light "C" will turn off as soon as the freezer reaches its set temperature. 4b), when the quick freeze switch "F" is turned on, while the model with the control panel shown in fig. 13, super freeze will be activated when dial "A" is turned to the "Super" position. thermostat dial "H" controls the temperature of the fridge , if it is set on "0" the fridge will not work. Turning the dial "H" clock-wise will turn the fridge on and the green led "G" will light up. 4) FOR FROST FREE FRIDGE FREEZER WITH 1 COMPRESSOR Thermostat dial "A" controls the temperature in the freezer, when the dial is in the "0" position the fridge and freezer are both off. Turning dial "A" clock-wise turns the freezer on, the green LED "B" switches on and the red LED "C" flashes. For longer periods the food should be wrapped in special foodstuff paper and preferably put into a refrigerator or, at least in a cool place. In this case it is advisable to eat the food within 24 hours or to cook it and then to re-freeze it. 13) Before freezing fresh food you should transfer food already frozen in the top compartment to the compartments below, making room for the fresh produce. 24 hours before freezing food follow the instructions below: Control panel (fig. 4b) To activate the quick freezing function push button "F" for at least 4 seconds, the yellow LED "E" will switch on to indicate that the quick freezing process has begun. This stage will stop automatically after 50 hours, restoring the appliance to the previous settings (the yellow LED will turn off). If you would like to stop the super freezing process before this time you have to push button "F" for more than 4 seconds. 13) To activate the quick freezing function turn dial "A" clock-wise to the "Super" position, the yellow LED "E" will switch on to indicate that the quick freezing process has begun. This stage will stop automatically after 50 hours (the yellow LED will turn off). To restore the appliance to the previous settings turn the dial "A" to the previous position, other than "SUPER". 2) for Built-In Fridge Freezer with 2 compressors To activate the quick freezing function turn dial "D" clock-wise to position "S", and the yellow LED "C" will light up. [. . . ] 7d ­ inside upper portion of the top door), before removing screws that fix the central hinge (between fridge and freezer door) open the top door and remove cap M and plastic insert L. When reversing the doors, the doors need to be supported at all times. Remove screw N from the right bottom hinge (fig 7e ­ bottom section of the appliance with kickplate removed). Take the left bottom hinge from the plastic bag and fix it to the bottom of the appliance with the screw you removed from the right bottom hinge. [. . . ]