User manual ROSIERES FE 9163

[. . . ] This appliance complies with the following European Directives: - 2006/95/EEC regarding "Low Voltage". - 90/396/EEC regarding Gas appliances - 89/109/EEC regarding "Materials in contact with food" - Moreover the above mentioned Directives comply with Directive 93/68/EEC. This appliance must be installed in accordance with the regulations in force and must only be used in well ventilated rooms. Consult the instructions booklet before installing and using the appliance. [. . . ] display 4-figures , 7-segments diplay for cooking times and time of day. Cooking time and manual function = saucepan symbol Automatic function = AUTO Minutes counter = bell symbol The symbols light up when the corresponding functions are selected. The bell symbol lights up when the minutes counter is operating When the set time is up, the sound signal rings and the bell symbol switches off. Sound signal The sound signal starts at the end of a programme or of the minutes counter function and it lasts for 15 minutes. Start programme and check The programme starts 4 seconds after it has been set. The programme can be checked at any time by pressing the corresponding button. Setting error A setting error is made if the time of day on the clock falls within the cooking start and end times. Cancelling a setting To cancel a setting, press the cooking time button and then press the - button until 00 00 appears on the display. Setting To set, press and release the desired function, and within 5 seconds set the time with and buttons. The + and - buttons increase or decrease the time at a speed depending on how long the button is pressed. setting the time Press any two buttons manualat the same time , and or button to set the desired time. Manual use By pressing the manual button the relay contacts switch on, the AUTO symbol switches off and the saucepan symbol lights up. Manual operation can only be enabled after the automatic programme is over or it has been cancelled. Automatic use Press the cooking time or end time button to switch automatically from the manual to the automatic function. Semi-automatic use with cooking time setting Press the cooking time button and set the desired time with or . When the cooking end time corresponds to the time of day, the relay and cooking time symbol switch off, the sound signal rings and the AUTO symbol flashes. Removal of oven door In-depth cleaning of the oven becomes more convenient if the door is removed following the instructions below: 1 open the oven door completely. 3 shut the oven door slowly until it reaches hooks "A", making sure these are locked into slots "B" of the oven door, as shown in fig. 4 Using both hands, push the oven door lightly inwards, toenable the door hinges "C" to come away from the slots "D" (see fig. After cleaning it, reposition it correctly following the abovesteps in the reverse order and flipping hooks "A" inwardsbefore you shut the oven door (fig. WARNINGS Do not use the oven door handle to move the appliance, such as to remove it from the packaging. IMPORTANT: The coating of the furniture must be able to withstand high temperatures (min. [. . . ] For your safety The product should only be used for its intended purpose which is for the cooking of domestic foodstuffs. Under no circumstances should any external covers be removed for servicing or maintenance except by suitably qualified personnel. MINIMUM FLOW ADJUSTMENT FOR WORK-TOP TAPS In order to adjust the minimum, act as follows: switch the burner on, and turn the knob towards the minimum flow position . Remove the knob from the tap, introduce a little screwdriver in the tap rod (fig. [. . . ]