User manual ROSIERES F 152

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ROSIERES F 152. We hope that this ROSIERES F 152 user guide will be useful to you.


ROSIERES F 152 : Download the complete user guide (813 Ko)

Manual abstract: user guide ROSIERES F 152

Detailed instructions for use are in the User's Guide.

[. . . ] For air evacuation to the outside, follow all the other instructions given on the "Warnings" sheet. Prepare the power supply within the telescopic chimney (for the electrical connection, follow all the other instructions on the "Warnings" sheet). Fixing to the wall: Draw a line on the wall in vertical line with your hob. [. . . ] Fixing to the wall: Draw a line on the wall in vertical line with your hob. Mark the first 2 holes to be drilled in the wall, respecting the distances indicated in Fig. As already specified on the "Warnings" sheet, bear in mind that the distance between the lower edge of the hood and the hob must be min. Fix the metal bracket (A) to the wall using the 2 holes just drilled (Fig. Use the 2 cut-out triangles on the bracket to position it exactly along the vertical axis of the hood. Adjust the horizontal position moving the hood to the right or left so that it is aligned with the wall units. If you also need to adjust the hood in height, operate on the adjusting screws (B) provided. When adjustment has been completed, without removing the hood, mark the other 4 holes to be drilled (C) in the wall. Button D:Activates the motor (calling the last speed used) and increases the speed until reaching maximum. Button E:FILTER ALARM/TIMER RESET: when pressing the key during display of the filter alarm (motor off) it resets the hour counter. When pressing the key when the motor is running, the TIMER is activated and the hood will automatically be switched off after 5 minutes. When the LED is green (flashing) it indicates that the TIMER has been activated with the key E. After 120h of operation, the LED L2 turns RED and flashes; It indicates that the grease filters need to be cleaned and the charcoal filters replaced. After cleaning the grease filters (and/or replacing the charcoal filters), restart the hour counter (RESET) by pressing the key E during display of the filter alarm. Pay special attention to the grease filters; If the model you have purchased has the controls shown in Figure 18, clean the grease filters when the Filter Alarm appears (see "Controls" paragraph). If the model you have purchased has the controls shown in Figure 17, clean the grease filters on average every 2 months depending on use. [. . . ] After cleaning the grease filters (and/or replacing the charcoal filters), restart the hour counter (RESET) by pressing the key E during display of the filter alarm. Pay special attention to the grease filters; If the model you have purchased has the controls shown in Figure 18, clean the grease filters when the Filter Alarm appears (see "Controls" paragraph). If the model you have purchased has the controls shown in Figure 17, clean the grease filters on average every 2 months depending on use. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ROSIERES F 152




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ROSIERES F 152 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.