User manual ROSIERES DVI 2 1 PN

[. . . ] First of all, place the steel supporting element (E) provided in the package in position, then insert the cook top (G) as illustrated in the figure below. Together with the seal on the two Domino cook tops, the steel support will ensure that the top is watertight. The Domino cook tops are fixed to the work top using the kit of brackets provided. Electric connections Check the details given on the nameplate situated on the underside of the cook top, then make sure that the rated mains voltage and power available are suitable for its operation. [. . . ] This indication only disappears when there is no longer any danger (at 60°C). To save energy, turn off the burner in advance, in order to exploit the residual heat. The residual heat indicator “H” is lost in the event of a mains power cut lasting more than 3 seconds. Turning off the cook top (Fig 10) The cook top can be turned off at any time by means of the on/off key (1). The display shows a “H” as long as the temperature remains above 60°C. Safety cut-out 15 If one or more burners are accidentally left on, the control automatically turns them off after a certain time has elapsed. The table below indicates the time interval, which depends on the power level setting. level 1 2 3–4 5–6 7–8 9 P Time limit (hours) 10 5 4 3 2 1 10 min. If the safety cut-out has tripped, the symbol “H” is displayed. To avoid the automatic cut-out being tripped, simply touch the burner selection key or the “+” or “-“ keys before the time runs out. Booster functions( Fig 11) The “booster” function for the ∅210 mm burner is enabled by touching the “Booster” key (8) regardless of the selected power level. If the power delivered to the other ∅ 145 mm burner exceeds 600W, this is automatically reduced to 600W. The corresponding indicator begins to display the new lower power setting and the previous power setting alternately. System temperature control A temperature sensor situated inside the cook top’s cooling unit constantly measures the temperature of the generator’s electronic circuits. In the event of these circuits overheating, the system reacts as follows: The display related to the induction plates shows the power levels alternatively with the symbol “c”. The overheating of the circuits definitely indicates an anomaly and means that the cook top has not been installed properly, or the openings for air circulation are not large enough 9. Pan sensor Each burner is complete with its own sensor for detecting the presence of a pan. The system is fine-adjusted to recognize the presence of a pan that, according to the scale of the EN standards, is one size smaller than the nominal diameter of the burner. If no pan are detected or if an aluminium pan is detected, the power level flashes on the heater display. If the power level symbol flashs also when a pan is actually on the burner, this generally means that the size or shape of the pan concerned is unsuitable. In this case, check whether the type of pan is suitable for induction cooking (see the pan manufacturer’s trademark or instructions). System self test When the system is connected to the power supply (during installation or after a power cut), a self-test message appears for 1 second on the displays relating to the burner power settings. [. . . ] If you cannot find any reason for the malfunction: turn off the appliance and do not manhandle it. The appliance comes with a guarantee certificate that entitles you to use the technical support service. The guarantee must be duly completed, kept in a safe place, and exhibited to the authorized technician in case of need, together with the fiscally valid document issued by the retailer at the time of purchase (delivery bill, invoice, cash register receipt, etc. ) indicating the name of the retailer, the date of delivery, details for identifying the product and the purchase price. [. . . ]