User manual ROSE DISPLAYS SUPERSNAP WITH ANOCONNECTORS

[. . . ] SuperSnapTM with AnoConnector Parts Instruction Sheet SuperSnap 12S300 Multi Clips 1UP-0100 6" Rod 97-0304-06 AnoConnector 06-2930 Instructions for assembly Step 1 Slide MultiClip into top of the SuperSnap. Holding clip at a slight angle, first insert one round end, then press down on other round end and push MultiClip into position. [. . . ] 7 Note: It is easier to open and close the SuperSnap by starting at one end and working your way down the holder. Step 6 Insert graphic into one section of SuperSnap (top and bottom). 8 Open all holders Figure 7 Figure 8 Step 7 To close, snap the SuperSnap shut. Repeat steps 5-7 for hanging additional graphics. Insert posters Figure 9 Figure 10 Step 9 Push end caps into place. Finished Look Important note: Please save and reuse the SuperSnap, End Caps, AnoConnectors, and MultiClips for future projects. Finished Look Page 2 of 2 The SuperSnap and AnoConnector are trademarks of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #02INSSuperSnapAnoConnector 35 Congress Street, Salem, MA 01970 Tel# 1- 800 631-9707 Fax# 1-800-560-2890 e-mail:signware@rosedisplays. com Incept-9. 12. 02 SuperSnapTM with AnoConnector Parts Instruction Sheet SuperSnap 12S300 Multi Clips 1UP-0100 6" Rod 97-0304-06 AnoConnector 06-2930 Instructions for assembly Step 1 Slide MultiClip into top of the SuperSnap. Holding clip at a slight angle, first insert one round end, then press down on other round end and push MultiClip into position. 3 Figure 1 Figure 2 Step 2 Insert AnoConnector into rail of one SuperSnap. 4 Figure 3 Figure 4 Step 3 Insert threaded rod halfway into clip rail of the same SuperSnap. 5 Step 4 Push the second piece of SuperSnap onto both AnoConnector and the threaded rod. 6 Repeat steps 2-4 for additional SuperSnaps. Figure 5 Figure 6 Page 1 of 2 The SuperSnap and AnoConnector are trademarks of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. [. . . ] Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #02INSSuperSnapAnoConnector 35 Congress Street, Salem, MA 01970 Tel# 1- 800 631-9707 Fax# 1-800-560-2890 e-mail:signware@rosedisplays. com Incept-9. 12. 02 [. . . ]