User manual ROSE DISPLAYS SPIDER CEILING TRACK WITH ADHESIVE

[. . . ] SpiderTM Ceiling Track Instruction Sheet Parts SpiderTM Ceiling Track with Adhesive 25-0027 Instructions for Hanging Step 1 Clean ceiling area and mark location for track on ceiling. Step 2 Peel adhesive liner off Spider Track. Step 3 Place Spider Track on marked ceiling location. [. . . ] Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #01INSSpider Track w/adhesive 35 Congress Street, Salem, MA 01970 Tel# 1- 800 631-9707 Fax# 1-800-560-2890 e-mail:signware@rosedisplays. com Incept-5. 30. 01 SpiderTM Ceiling Track Instruction Sheet Parts SpiderTM Ceiling Track with Adhesive 25-0027 Instructions for Hanging Step 1 Clean ceiling area and mark location for track on ceiling. Step 2 Peel adhesive liner off Spider Track. Step 3 Place Spider Track on marked ceiling location. Be sure it is postioned correctly. Figure 1 Figure 2 Step 4 Apply pressure along track for 1 minute, then allow adhesive to cure for 1 hour before using track. Note: Install OneUp anchors with ladderless RoPole Installation Tool. Figure 3 Figure 4 The SpiderTM Ceiling Track and RoPole are trademarks of and OneUp is a registered trademark of Rose Displays, Ltd. [. . . ] Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. [. . . ]