User manual ROBLIN VIZIO INOX 900 DIMENSIONS

[. . . ] Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. [. . . ] If you connect a registered USB device containing analyzed tracks, the USB device can be unregistered again. to change the channel: Press / (ALBUM /) to select the desired channel. To change the track: Press +/­ repeatedly until the desired track appears, then press the control dial. Note If the connected USB device contains many tracks, it may take time for "SensMeTM channels" to start, due to data reading. In these Operating Instructions, "iPod" is used as a general reference for the iPod functions on the iPod and iPhone, unless otherwise specified by the text or illustrations. For details on the compatibility of your iPod, see "About iPod" (page 27) or visit the support site on the back cover. Caution for iPhone When you connect an iPhone via USB, telephone volume is controlled by iPhone itself. In order to avoid sudden loud sound after a call, do not increase the volume on the unit during a telephone call. Note Do not detach the front panel during playback of the iPod, otherwise data may be damaged. Slide the USB cover, then connect the iPod to the USB connector with the USB connection cable for iPod (not supplied)*. The tracks on the iPod start playing automatically from the point last played. Rotate the control dial until "EQ7 PRESET" appears, then press it. Rotate the control dial until the desired equalizer curve appears, then press it. "CUSTOM" of EQ7 allows you to make your own equalizer settings. The unit can simulate a natural sound field by delaying the sound output from each speaker to suit your position. FRONT L (): Front left FRONT R (): Front right FRONT (): Center front ALL (): In the center of your car OFF: No position set Rotate the control dial until "EQ7 SETTING" appears, then press it. Rotate the control dial until "BASE" appears, then press it. 0 kHz Rotate the control dial to adjust the volume level, then press it. You can also set the approximate subwoofer position from your listening position if: ­ the subwoofer is connected ­ the listening position is set to "FRONT L, " "FRONT R, " "FRONT" or "ALL. Rotate the control dial until "POSITION" appears, then press it. Rotate the control dial to select from "FRONT L, " "FRONT R, " "FRONT" or "ALL, " then press it. Rotate the control dial until "SW POSITION" appears, then press it. [. . . ] If the unit is turned off and the display disappears, it cannot be operated with the remote commander. An optional power amplifier is connected and you are not using the built-in amplifier. The power supply lead or battery has been disconnected or it is not connected properly. The leads are not matched correctly with the car's accessory power connector. [. . . ]