User manual ROBLIN VISIERE 9740 DIMENSIONS

[. . . ] This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft. Warning if your car's ignition has no ACC position Be sure to set the Auto Off function (page 19). The unit will shut off completely and automatically in the set time after the unit is turned off, which prevents battery drain. [. . . ] Then "MODE AUDIO" will appear and the play mode will change to iPod mode. You can listen to tracks repeatedly (repeat play) or in random order (shuffle play). *1 iPod only *2 CD only *3 USB and iPod only During playback, press (REP) or (SHUF) repeatedly until the desired play mode appears. The unit enters the Quick-BrowZer mode, and the list of search categories appears. When the track list appears, press (BACK) repeatedly until the desired search category appears. * During playback, press (BROWSE) for more than 2 seconds to directly return to the beginning of the category list (USB only). Rotate the control dial to select the desired search category, then press it to confirm. When many items are in a category, you can search the desired item quickly. In Alphabet search, a symbol or article (a/an/ the) before the selected letter of the item is excluded. Depending on the search item you select, only Jump mode may be available. Alphabet search may take some time, depending on the amount of tracks. Rotate the control dial until the desired menu item appears, then press it. ) AUX VOL*3 (AUX Volume level) Adjusts the volume level for each connected auxiliary equipment: "+18 dB" ­ "0 dB" ­ "­8 dB. " This setting negates the need to adjust the volume level between sources. The following items can be set: EQ7 PRESET (page 16) EQ7 SETTING (page 17) POSITION SET POSITION (Listening Position setting) (page 17) ADJ POSITION*1 (Listening Position adjustment) (page 18) SET SW POS*1 *2 (Subwoofer Position setting) (page 17) BALANCE Adjusts the sound balance: "RIGHT-15" ­ "CENTER" ­ "LEFT-15. Advanced Sound Engine creates an ideal incar sound field with digital signal processing. You can select an equalizer curve from 7 equalizer curves (XPLOD, VOCAL, EDGE, CRUISE, SPACE, GRAVITY, CUSTOM or OFF). Rotate the control dial until "EQ7 PRESET" appears, then press it. Rotate the control dial until the desired equalizer curve appears, then press it. The unit can simulate a natural sound field by delaying the sound output from each speaker to suit your position. FRONT L (): Front left FRONT R (): Front right FRONT (): Center front ALL (): In the center of your car OFF: No position set "CUSTOM" of EQ7 allows you to make your own equalizer settings. Rotate the control dial until "EQ7 SETTING" appears, then press it. [. . . ] Never touch the connectors directly with your fingers or with any metal device. The following checklist will help you remedy problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. For details on using the fuse and removing the unit from the dashboard, refer to the installation/connections manual supplied with this unit. [. . . ]