User manual ROBLIN ORELIA S

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ROBLIN ORELIA S. We hope that this ROBLIN ORELIA S user guide will be useful to you.


ROBLIN ORELIA S : Download the complete user guide (508 Ko)

Manual abstract: user guide ROBLIN ORELIA S

Detailed instructions for use are in the User's Guide.

[. . . ] REMPLACEMENT FILTRE AU CHARBON ACTIF This filter is not washable and cannot be regenerated, and must be replaced every 4 months of operation, or more frequently with heavy usage. Dear Customer, If you follow the recommendations contained in this Instruction Manual, your appliance will give you constant high performance and will remain efficient for many years to come. [. . . ] The hood should not be used by children or persons not instructed in its correct use. mAINTENANCE · Switch off or unplug the appliance from the mains supply before carrying out any maintenance work. 1 on the wall as shown at X mm below the first bracket (X = height of the upper chimney section supplied). 1 on the wall as shown at 357 mm above the horizontal reference line, making sure that the holes used to fix the corner to the wall are equidistant. Fix the brackets and the Support using the 12a (4, 2 x 44, 4) screws supplied. Insert the two screws 12r (4, 2 x 12, 7) supplied in the hood body fixing holes, located on the front plate of the Hood Connector Support, leaving a gap of 5-6 mm between the Support and the head of the screw. Before attaching the hood body, tighten the two screws Vr located on the hood body mounting points · Adjust screws Vr to level the hood body DUCTED VERSION AIR EXHAUST SYSTEM When installing the ducted version, connect the hood to the chimney using either a flexible or rigid pipe ø 150 or 120 mm, the choice of which is left to the installer. If this is not the case, adjust the position by either reversing the connection extension pieces 14. Connect the hood to the mains through a two-pole switch having a contact gap of at least 3 mm. Slightly widen the two sides of the upper flue and hook them behind the brackets 7. [. . . ] Replace with another of the same type, making sure that the two pins are properly inserted in the lamp holder socket holes. This appliance conforms to European Low Voltage Directive 73/23/CEE governing electrical safety, European Directive 89/336/ CEE on Electromagnetic Compatibility and Directive 93/68/CEE regarding CE Marking. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ROBLIN ORELIA S




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ROBLIN ORELIA S will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.