User manual ROBLIN LAGOON S

[. . . ] Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the area in which the hood will be installed. 1 on the wall as shown about 1-2 mm from the ceiling or upper limit aligning the centre (notch) with the vertical reference line. [. . . ] The hood can be switched on pushing directly onto the requested speed without firstly having to select 0/1 button. The function becomes active when the button is pushed for about 2 seconds. This function can be interrupted by means of pressing any of the buttons. indicates that the Metal grease filters saturation alarm has been triggered , and the filters need to be washed. (Reset; check the Maintenance-paragraph) indicates that the activated charcoal odour filter saturation alarm has been triggered , and the filter has to be replaced; the metal grease filters must also be washed. The activated charcoal odour filter is triggered after 200 working hours. REMOTE CONTROL (OPTIONAL) The appliance can be controlled using a remote control powered by a 1. Press button T3 for at least 3 seconds, until the leds start to flash. cleaning the filters · The filters are washable and must be cleaned when the LED S1 lights up or at least every 2 months of operation, or more frequently for particularly heavy usage. Remove the filters one at a time by pushing them towards the back of the group and pulling down at the same time. [. . . ] By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. [. . . ]