User manual RED CASTLE RECARO

[. . . ] It must be fixed in your vehicle EXCLUSIVELY with a 3 point seat belt (static or automatic) which conforms to the ECE-16 regulation or its equivalent. The RC/RECARO Car seat must never be installed in front seats equipped with a RBAG front airbag, this may prove AI very dangerous. ALWAYS attach your baby with the safety harness even when you are not using the RC/RECARO car seat in the vehicle. The manufacturer can only guarantee the safety of the car seat if it is used by the first time owner. [. . . ] Never take the baby out of the car seat for any reason while the vehicle is in motion. When used as a reclined cradle, this car seat is not intended for use during long periods of sleep. How to adjust the safety harness (Figs 3+4) Harness must be adjusted to fit the child's size. The harness straps must go through the slots nearest to the baby's shoulders. The RC/RECARO car seat has two adjustable harness heights which enables it to adapt to the child as he grows. 3) To close: assemble the 2 parts of the buckle and insert them into the fastener until they are secured ("click" heard). Adjusting the harness: It is recommended that you adjust the length of the harness to fit the size of the child BEFORE installing the car seat in the car. To untighten the safety harness: With one hand push down on the TMS regulator located at the front of the car seat, in the direction of the arrow (fig. 5 / B), and with the other hand, simultaneously pull the shoulder straps toward you. IMPORTANT: The safety harness should be tightened firmly but must not restrict the child's movements. The harness buckle should be situated as low as possible on the child's abdomen and never on his stomach. With a piece of fabric) so that it will be more comfortable for baby when placing him into the car seat. This will also prevent metal parts from heating up and perhaps burning him. unattached , in the case of an accident , he will be transformed into a "flying object ". Never travel with your own 3 point set belt attached around you and the child. Make sure that all of passengers in the vehicle are wearing their seat belts correctly attached. Make sure that any luggage inside the vehicle is placed in such a way that, in the event of an accident, it does not injure either the baby or any other occupants. Place the car seat in the vehicle with caution, making sure that it is correctly installed. Always check the wear and tear of the vehicle seat belt and the car seat safety harness. Always also check that no part of the car seat, its safety harness, or the car seat belt is caught beneath the passenger seat or in the car door. When the car seat is combined on the stroller, NEVER lift the stroller by the car seat but ONLY by the stroller chassis. Keep this instruction manual close to hand at all times for future reference. [. . . ] When used as a baby bouncer, this car seat does not replace a crib or a cot. When the child needs to sleep, he should be place in an appropriate crib or cot. Do not use any accessories or replacement parts other than those approved by the manufacturer. Pull the sun screen taut towards the lower part of the seat and attach the velcros (photo b2). [. . . ]