User manual RED CASTLE RC

[. . . ] Then, slip the diagonal belt around the rear of the car seat and feed it through the guide located at the back of the car seat (fig. IMPORTANT: check that the car seat belt does not slip underneath the adjustment lever (fig. Choose the seat back position best suited to your child’s weight: 1 Position A up to 5kgs 2 Position B up to 5kgs 3 Position C Only to be used in the car with the Primafix base (fig. 16) s e r e s e s s e Installing the RC 2 car seat in the car (with the car seat belts) WARNING • Never leave the child unsupervised. [. . . ] € Sit your child comfortably in the car seat with his back firmly against the rear of the seat. € Adjust the position of the seat back (see chapter «adjusting the seat back and handle positions»). € Assemble the 2 parts of the buckle together and insert them into the fastener. € Adjust the harness to fit your baby (see chapter on «adjusting the harness»). N p ( i i GB Head hugger (Sun shade) The RC 2 car seat includes a 3 function head hugger – it reduces the car seat size, it cushions the baby’s head, it protects from the sun. The head hugger provides extra comfort when baby is lying down and lateral support for baby’s head ad upper body. As he grows, remove the padding and use it as a simple head hugger and sun shade (unfolds and closes with the zip). Unfolded as sun shade H T T b e t p 1 1 1 I y t e I a I 1 u Folded back A • Adjusting the seat back and handle positions To adjust the seat back: • 22 s d s o Lift up the lever located at the rear of the car seat and choose the position best suited to your baby’s weight: • Adjust the hood as required in order to protect your baby from the sun. € To remove the hood : push down on the plastic attachments at either side of the hood, at the same time pulling the end of the hood upwards. Attaching the apron: • Before attaching the apron, attach the hood (see previous chapter). € Match the velcro straps and the press studs of the apron and the hood with those on the car seat cover. Attaching the sun screen • Position the wider part (shown at the top of fig. € Pull the sun screen taut towards the lower part of the seat and attach the velcros (fig. IMPORTANT: The sun screen has been designed to reduce the sun’s glare and limit the effect of UV rays. The use of this sun screen does not exempt you from the need to protect your child. 16) Position D 4 Traditional NB : When not used in the car, all 4 positions are possible on the stroller up to 9kgs. (*) IMPORTANT: the position C (semi-reclining) is not authorized in a vehicle unless the car seat is installed on the Primafix base. To change position, release the handle position by pushing down simultaneously on the buttons at either side (fig. 17) while at the same time moving the handle forwards or backwards, to the required position (« click » heard). 1a -> Position when used in the car 1b -> Position when carrying baby 1c -> Position when used as a rocking chair / on the stroller IMPORTANT: Remain vigilant at all times! [. . . ] € When used as a baby bouncer, this car seat does not replace a crib or a cot. When the child needs to sleep, he should be place in an appropriate crib or cot. € Do not use any accessories or replacement parts other than those approved by the manufacturer. E O L B G A K A • • GB • For your child’s safety we formally advise against installing the car seat on a supermarket trolley. [. . . ]