User manual PYRAMID PW877X DATASHEET

[. . . ] The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. Unless otherwise specified, the explanation about these illustrations is provided for FE-5050. Step 1 Checking the contents of the box or Digital camera Strap LI-42B Lithium Ion Battery F-2AC USB-AC adapter USB cable AV cable Other accessories not shown: warranty card Contents may vary depending on purchase location. PYRAMID Setup CD-ROM Step 2 4 Preparing the Camera Step 3 5 Shooting and Playing Back Images "Preparing the Camera" (p. 19) Step How to Use the Camera Step Printing "Camera Settings" (p. 50) Contents Names of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] DPOF reservations set by another DPOF device cannot be changed by this camera. Making new DPOF reservations with this camera will erase the reservations made by the other device. DPOF print reservations can be made for up to 999 images per card. DO NOT REMOVE USB CABLE PRINT CANCEL MENU CONTINUE CANCEL SET OK 50 EN Single-frame print reservations [<] 1 2 4 Display the setup menu. "Using the Menu" (p. Press the H button. X From the playback menu q, select [PRINT ORDER] and then press the H button. PRINT ORDER BACK MENU NO DATE TIME SET OK < U 5 SET OK Use FG to select the [X] (date print) screen option, and press the H button. Submenu 2 Application This prints the image only. This prints the image with the shooting time. PRINT ORDER 1 ( 1) EXIT MENU 3 Use FG to select [<], and press the H button. 4/30 0 NO DATE TIME NORM 14M FILE 100 0004 '10/10/26 12:30 SET OK SET CANCEL BACK MENU SET OK 6 Use FG to select [SET], and press the H button. EN 51 Reserving one print each of all images on the card [U] Resetting the print reservation data for selected images 1 2 3 1 2 Follow Steps 1 and 2 in [<] (p. Follow Steps 5 and 6 in [<]. 1 2 3 4 5 6 7 Follow Steps 1 and 2 in [<] (p. Use HI to select the image with the print reservation you want to cancel. If necessary, repeat Step 4, and then press the H button when finished. Use FG to select the [X] (date print) screen option, and press the H button. The settings are applied to the remaining images with the print reservation data. Resetting all print reservation data Follow Steps 1 and 2 in [<] (p. Use FG to select either [<] or [U], and press the H button. PRINT ORDER SETTING PRINT ORDERED RESET KEEP BACK MENU SET OK Use FG to select [SET], and press the H button. 3 Use FG to select [RESET], and press the H button. 52 EN Usage Tips If the camera does not work as intended, or if an error message is displayed on the screen, and you are unsure of what to do, refer to the information below to fix the problem(s). Press the q button to switch to the shooting mode. Wait until #(flash charge) stops blinking before taking pictures. Troubleshooting Battery "The camera does not work even when batteries are installed". The camera may activate the lens and make a noise even if no operation is performed. This is because the camera automatically performs actions of auto focus as far as it is ready to shoot. SET OK NO PICTURE Error message When one of the messages below is displayed on the monitor, check the corrective action. Error message Corrective action Card problem Insert a new card. Problem with selected image Use photo retouch software, etc. PICTURE ERROR If the image still cannot be viewed, the image file is corrupted. to edit the image on a computer. THE IMAGE CANNOT BE EDITED CARD ERROR Card problem The card write-protect switch is set to the "LOCK" side. · Erase unwanted images. *1 Card problem · Replace the card. · Erase unwanted images. *1 BATTERY EMPTY Battery problem Charge the battery. Connection problem Connect the camera and computer NO CONNECTION or printer correctly. Printer problem Refill the ink in the printer. MEMORY FULL NO PAPER CARD FULL NO INK 54 EN Error message Corrective action Printer problem Remove the jammed paper. Printer problem Turn off the camera and printer, check the printer for any problems, and then turn the power on again. Problem with selected image Use a computer to print. Shooting tips When you are unsure of how to take a picture that you envision, refer to the information below. JAMMED SETTINGS CHANGED*3 Focusing "Focusing on the subject" Taking a picture of a subject not in the center of the screen After focusing on an object at the same distance as the subject, compose the shot, and take the picture. 35) The camera tracks the subject movement automatically to focus on it continuously. [. . . ] 2 The customer shall transport the product to the dealer or Olympus authorized service station at his own risk and shall be responsible for any costs incurred in transporting the product. 3 This warranty does not cover the following and the customer will be required to pay repair charge, even for defects occurring within the one year period referred to above. Any defect that occurs due to mishandling (such as an operation performed that is not mentioned in the Handling Care or other sections of the instructions, etc. ) b. performed by anyone other than Olympus or an Olympus authorized service station. [. . . ]