User manual PUNCH! SOFTWARE MASTER LANDSCAPE V4.5.1

[. . . ] User's Guide www. punchsoftware. com TM © 2002 Punch!Master Landscape & Home Design User's Guide All rights reserved. This document, as well as the software described in it, is furnished under license and can only be used or copied in accordance with the terms of the license. Portions of the software described in this document © 1995-2002 Microsoft Corporation. [. . . ] The Four-Point Freehand Roof Tool Properties dialog box is displayed. 2 Type 1" (one inch) in the Soffit Depth dialog box. 5 Click a wall on the design window to define the start point of the roof section. Master Landscape & Home Design User's Guide 149 Chapter 10 Roofing Plan Tab 7 Press the mouse button and drag a box around all points of the roof section to select it. Note the elevation that is specified in red as the upper elevation of the roof section. 8 On the Edit menu, click Copy or press CTRL+C or right-click the selection and click Copy on the pop-up menu that is displayed. 9 On the Edit menu, click Paste or press CTRL+V or right-click the selection and click Paste on the pop-up menu that is displayed. 10 Rotate the bold arrow in the center of the roof section 180 degrees so it faces the opposite direction from the other arrow. 11 Click the lower edge of the second roof section and resize the roof. 150 PUNCH!Master Landscape & Home Design User's Guide Drawing a Saltbox Roof 12 Right-click the second roof section and click Set Roof Elevation from the pop-up menu that is displayed. 13 Type the number noted from Step 7. Master Landscape & Home Design User's Guide 151 Chapter 10 Roofing Plan Tab Note: To close the gable ends of this roof style refer to "Defining Gable Wall Segments" on page 97. 152 PUNCH!Master Landscape & Home Design User's Guide Adding a Soffit Adding a Soffit A soffit provides the barrier between the exterior wall and the roof overhang. You will add soffit after you have drawn exterior walls and all roof sections. 2 On the Design menu, click Work on Floor, Work on Second Floor (or the floor you want to roof) or click on the Active Floor Icon, then click Work on Second Floor on the pop-up menu that is displayed. 5 Following the outside perimeter of the roofline, click and move the pointer to the next corner point. 6 Right click to end drawing mode. 2 1 2 2 2 4 2 3 PUNCH!Master Landscape & Home Design User's Guide 153 Chapter 10 Roofing Plan Tab 7 On the Floor Plan tab, click the Floor Cutout Tool. 9 Following the inside perimeter of the exterior walls, click and move the pointer to the next corner point. 10 Right click to end drawing mode. 2 1 2 2 2 4 2 3 Before After 154 PUNCH!Master Landscape & Home Design User's Guide Chapter 11 Deck Plan Tab If you are looking for a way to add more living space to your existing home, but don't want to build an addition, you might consider adding a deck. Master Landscape contains an extensive toolset for designing outdoor living areas. In this chapter, you will learn how to design multi-story and multi-level decks, including options for handrails, skirt trim and steps. PUNCH!Master Landscape & Home Design User's Guide 155 Chapter 11 Deck Plan Tab Adding a Deck Adding a deck is a great way to add living space to your home. With Master Landscape you can build deck sections on the fly with or without railings. [. . . ] The color you defined is applied and will be used for all subsequentlydrawn objects. 330 PUNCH!Master Landscape & Home Design User's Guide Applying Color and Texture Applying Color and Texture Whether you are drawing a fireplace, kitchen cabinets, or a loveseat, it's easy to apply the appropriate texture. 3D Custom Workshop includes a wide variety of textures, plus you have the ability to create a custom color palette to suit your needs. To apply texture 1 Click the Rendering Style button or on the View menu, click 3D Rendering Style, Textured. [. . . ]