User manual PROGRESS PC3200

[. . . ] PC3200 PC3201 PC3205 3302 02 03 02 15. (PC3201, PC3205) 16. (PC3201, PC3205) (PC3200, PC3205) 11. 17. 21. 22. 23. 13. (PC3200) 10. (PC3201, PC3205) 14. 12. (PC3201) (PC3200, PC3201) 18. 24. 25. 26. (PC3201, PC3205) 27. 28. 19. 20. 29. 30. 31. PROGRESS PC 3200, 3201, 3205 English Français Italiano Español Português Magyar Polski Hrvatski Slovensky È esky English PROGRESS PC 3200, 3201, 3205 DESCRIPTION 1. Suction inlet Dustbag full indicator Variable power control (PC3201, PC3205) On/off switch Cable rewind button Wheel Dustbag compartment Carrying handle Compartment open button Hose 11. [. . . ] Do not vacuum up any highly flammable or explosive substances or gases. Do not operate the vacuum cleaner too close to heaters and radiators, stoves etc. Before you start using the vacuum cleaner, please remove large or sharp objects from the floor to prevent damage to the cloth dustbag. INSTRUCTIONS FOR USE Before placing into operation make certain that the filters are in the proper position. Before using the appliance, unwind a sufficient length of cable and insert the plug into the power socket. It is advisable to set the power control to MIN before switching on the appliance (PC3201, PC3205). To rewind the power cable, press the rewind button with foot, and guide the cable with hand to ensure that it does not whip causing damage. By moving the variable power control, the suction power can be adjusted (PC3201, PC3205). -4- - 25 - PROGRESS PC 3200, 3201, 3205 MAINTENANCE REPLACING THE DUSTBAG Always operate the cleaner with the dustbag installed. If you forget to attach the dustbag or attach it in the wrong manner, the dust cover may not close completely. Textile dustbag (PC3200, PC3201) Remove the textile bag from the holder (fig. Replace the plastic clip ensuring that both sides of the bag are parallel (fig. 21). REPLACING THE FILTERS The dustbag must be replaced if the window of the dustbag full indicator is completely red when the cleaner is operating at maximum power and the nozzle is raised from the floor. Filters should be replaced at least twice a year or when they become visibly soiled. [. . . ] Blocked air flow and dirty filters: The cleaner stops automatically if a blockage occurs in the nozzle/tube/hose or if the filters are blocked with dirt. Disconnect from mains and allow the cleaner to cool for 20-30 minutes. [. . . ]