User manual PROGRESS 6 IN 1 EL

[. . . ] correct use · This dishwasher is only intended for washing household utensils suitable for machine washing. Knives and other items with sharp points must be loaded in the cutlery basket with their points down or placed in a horizontal position in the upper basket. Avoid opening the door whilst the appliance is in operation, hot steam may escape. ⷠDo not take any dishes out of the dishwasher before the end of the washing cycle. [. . . ] Helpful hints and tips Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher. ⷠBefore loading the dishes, you should: ­ Remove all left over food and debris. ⭠Soften remnants of burnt food in pans · When loading the dishes and cutlery, please note: ­ Dishes and cutlery must not impede the rotation of the spray arms. With the opening downwards so that water cannot collect in the container or a deep base. ­ Dishes and items of cutlery must not lie inside one another, or cover each other. Plastic items and pans with non stick coatings have a tendency to retain water drops; these items will not dry as well as porcelain and steel items. ) must be loaded in the upper basket and arranged so they do not move. Progress 73 For washing in the dishwasher the following cutlery and dishes are not suitable: are of limited suitability: · Cutlery with wooden, horn, china or mother-of- · Plastic items that are not heat resistant. Older cutlery with glued parts that are not tem- · Silver and aluminium parts have a tendency to · White, egg yolk and mustard often cause dis· Ways clean left-overs from silver immediately, if · items made from synthetics fibres. The lower basket The lower basket is designed to take saucepan, lids, plates, salad bowls, cutlery etc. Service dishes and large lids should be arranged around the edge of the basket, ensuring that the spray arms can turn freely. Take hold of the coarse filter (A) by the handle with the hole and remove from the microfilter (B). Remove the flat filter from the base of the washing compartment and clean both faces thoroughly. Put the flat filter back in the base of the washing compartment and ensure that it fits perfectly under the two guides (C). If residues of soil have clogged the holes in the spray arms, remove the debris with a cocktail stick. External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend every 3 months you run the wash programme for heavy soiled dishes using detergent but without dishes. Prolonged periods of non-operation If you are not using the machine for a prolonged period of time you are advised to: 1. Leave the door ajar to prevent the formation of any unpleasant smells. Frost precautions Avoid placing the machine in a location where the temperature is below 0°C. Unavoidable, empty the machine, close the appliance door, disconnect the water inlet pipe and empty it. [. . . ] If the appliance is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. DO NOT use connection hoses which have previously been used on an old appliance. This appliance has been fitted with safety features which will prevent the water used in the appliance from returning back into the drinking water system. Water inlet hose with safety valve After connecting the double-walled water inlet hose, the safety valve is next to the tap. [. . . ]