User manual PRIMARE I32

[. . . ] To connect bare wires unscrew the terminal, pass the bare wire through the hole in the terminal bolt, and clamp the wire in place by screwing the terminal back down hand tight. Connect the balanced inputs IN1 and IN2 to balanced sources, such as a Primare CD32 CD player, using high quality XLR cables. Connect the unbalanced inputs IN3, IN4, and IN5 to unbalanced sources, using high quality RCA cables. If this cable is not suitable for your power outlets please contact your supplier for an alternative cable. Note: See Phase, page 8, for information about getting the best sound from your I32. Unbalanced inputs If any of these items are missing please contact your supplier. We recommend you retain the packaging in case you need to transport the unit at a later date. · Media module Additional inputs are provided by the optional media module. [. . . ] Warning: this will reset any source settings and aliases you have defined. · 10 To set the start-up volume Set the Volume default setting to the volume you want to use: General settings VOL Volume default 10 Volume max 60 Input5 Normal Set the IR input to Front to control the I32 using a remote control pointed at the front panel, or Back to control it via the IR-input on the back panel: General settings Input5 IR input Factory DF VOL 10 setting input to Fixed level Input 5 can be configured to provide high-quality amplification of the main channels of a surroundsound processor, with volume control provided by the processor. Note: This will give full-volume output. Normal Front Reset To reset to the factory default settings · Highlight the Factory DF item and press the R button on the front panel, or the SELECT button on the remote control, to select it. 10 Master bal 00 LR 00 Volume default 25 Volume max 79 After setting it to Back you can reset it to Front by operating the settings menu from the front panel controls. You will be prompted: General settings Yes No VOL 10 Confirm factory DF To set the start-up balance Set the Master bal setting to the balance you want to use: General settings VOL · Configure the Input5 option on the settings menu to SSP. General settings Volume max Input5 IR input VOL · · 10 Source offset 0 Master 00 LR 00 Volume default 10 10 Turn the SELECTOR control on the front panel, or press the V button on the remote control, to highlight Yes. Press the R button on the front panel, or the SELECT button on the remote control, to proceed and reset the I32. 79 SSP Front Alternatively, if you choose not to reset, highlight No and press the R button on the front panel, or the SELECT button on the remote control, to select it. i32 user guide technical speciFication The I32 uses proprietary UFPD power technology to provide high power output with very low distortion, with an ecologically-friendly low standby power. additional inFormation These instructions help you get the best possible sound from your I32, and give information about using it with a CD32. F e at u r e s Ultra Fast Power Device (UFPD) Class-D Amplifier 26dB constant loop gain in the entire audio range Power Factor Control (PFC) power supply perFormance Gain 26dB phase The phase of the AC supply can make a significant difference to the sound. Ensure that the live pin of the AC power cable is connected to the left-hand pin of the power connector, viewed from the back panel. using the i32 With a cd32 Your I32 is an ideal companion to the Primare C32 CD Player. For best results link the two products together as follows using the two cables supplied with the I32: Frequency response 10Hz ­ 20kHz, -0. 5dB speaker outputs Power 2 x 120W / 8, 2 x 230W / 4 THD <0. 05%, 20Hz ­ 20kHz, 10W at 8 burn-in Your Primare will start to sound best after an initial burn-in of approximately 24 hours. WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture. CAUTION: In Canada and the USA, to prevent electric shock, match the wide blade of the plug to the wide slot in the socket and insert the plug fully into the socket. This product is designed and manufactured to meet strict quality and safety standards. However, you should be aware of the following installation and operation precautions. CAUTION ATTENTION 5. Heat The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated 'dangerous voltage' within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords and plugs, and the point where they exit from the appliance. Locate the appliance away from naked flames or heat producing equipment such as radiators, stoves or other appliances (including other amplifiers) that produce heat. 6. Grounding The appliance has been designed for use in moderate climates. Ensure that the grounding means of the appliance is not defeated. 7. Power lines Only use a rack or stand that is recommended for use with audio equipment. If the equipment is on a portable rack it should be moved with great care, to avoid overturning the combination. Locate any outdoor antenna/aerial away from power lines. 13. Take heed of warnings & instructions Unplug the unit from the mains supply before cleaning. The case should normally only require a wipe with a soft, damp, lint-free cloth. We do not advise the use of furniture cleaning sprays or polishes as they can cause indelible white marks if the unit is subsequently wiped with a damp cloth. If the unit has a stand-by function, a small amount of current will continue to flow into the equipment in this mode. [. . . ] All other servicing should be referred to qualified service personnel. 16. Damage requiring service The appliance should be serviced by qualified service personnel when: A. the appliance does not appear to operate normally or exhibits a marked change in performance, or E. the appliance has been dropped or the enclosure damaged. 4. Ventilation Do not place the equipment on a bed, sofa, rug or similar soft surface, or in an enclosed bookcase or cabinet, since ventilation may be impeded. [. . . ]