User manual PHILIPS WAS7000

[. . . ] Wireless Music Station WAS7000 User manual Manuel d'utilisation User manual English 2 Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13Amp plug. To change a fuse in this type of plug, proceed as follows: Remove fuse cover and fuse. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug should be fitted in its place. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note:The severed plug must be disposed, so as to avoid a possible shock hazard due to it being inserted into another 13-Amp socket. [. . . ] or Equalizer) The icon disappears REC MARK/UNMARK DBB MENU VIEW OK 25 English 6. 2. 3 Selecting tracks of a particular 6. 3 Different play modes: REPEAT, SHUFFLE 6. HD(Located on Center) 6. 5 Viewing track information 1 Press VIEW on the remote control once or more times to enter the playback screen. MENU VIEW On the source unit (Center or Station) where music is playing: English 1 In HD source, select and play the album or playlist you wish to play on the destination unit (see 6. 2 : Selecting and searching) Helpful hints: ­ Press É Å to interrupt playback if you want the playback to continue from where it has paused on the destination unit. ) will be retained on the destination unit (see 6. 3 Different play modes: REPEAT, SHUFFLE). OK 2 Press MUSIC FOLLOWS ME to activate The icon appears 2 Press 2 The display shows the track information (e. g. track name, file type, file size, bit rate of mp3/wma files) Helpful hints: ­ MUSIC FOLLOWS ME will be automatically deactivated if you do not activate MUSIC FOLLOWS ME on the destination unit within 5 minutes ­ To deactivate MUSIC FOLLOWS ME, press MUSIC FOLLOWS ME again or press other function keys (e. g. SLEEP or 1 / 2 / 3 / 4) On the destination unit (Center or Station), where the music will continue: 3 4 3 Press VIEW once or more times to return to the playback screen Check that the destination unit is switched on or is already in standby mode Press MUSIC FOLLOWS ME Playback of selected music stops on the source unit and continues on the destination unit The icon disappears 6. 6 Moving music playback between Center and Stations Via Wi-Fi, music playback can be moved between the Center and Stations. Even in different parts of your home, you and your family will still be able to enjoy and share music with ease. 6. 6. 1 MUSIC FOLLOWS ME As you move around at home, let the music move with you between the Center and Station or between Stations. 5 To stop MUSIC FOLLOWS ME, press STOPÇon the destination unit Helpful hints: After activating MUSIC FOLLOWS ME on the destination unit: ­ make sure that the source unit is switched on or is already in standby mode. ­ you can select other tracks or source for playback. 26 6. HD(Located on Center) English 4 6. 6. 2 MUSIC BROADCAST MUSIC BROADCAST allows you to broadcast music from Center to Stations. On the Stations To stop MUSIC BROADCAST, press STOPÇ on the Center Helpful hints: ­ To exit MUSIC BROADCAST on a Station, press STOPÇ on the Station. To broadcast music to the Station again, press STOPÇ on the Center, and then activate MUSIC BROADCAST on the Center again. ­ MUSIC BROADCAST will also stop when: ­ the Center is put to standby mode or power-saving mode; ­ the selected album or playlist has reached the end. 6. 7 Viewing system information 1 Check that the Station is switched on or is already in standby mode (see 5. Basic functions) On the Center 1 2 3 Select Information on the Station a. Press the navigation controls 3 or 4 and 2 to enter Information menu The display shows: System, WiFi and Ethernet In HD source, select and play the album or playlist that you wish to broadcast to the Stations (see 6. 2: Selecting and searching) Press MUSIC BROADCAST to activate The icon appears on the Center and Stations. A 5-second countdown starts. 2 Press the navigation controls 3 or 4 and 2 to select System The following information will be shown on the display: the name of the Station, firmware version On the Center and Stations: The selected music starts to play simultaneously after the 5second countdown. for illustration only 27 7. FM radio 7. 1 Tuning to radio stations 1 2 3 Connect the supplied FM wire antenna to the Station (see 3. Installation) Check that the set is switched on or in standby mode (see 5. Basic functions) Press SOURCE once or more times to select Radio Playback screen appears. Display shows: Radio, the radio station frequency and a preset number (if already programmed) Press and hold 3 or 4 until the frequency in the display starts running. 7. 2 Storing preset radio stations You can store up to 60 preset radio stations in the memory. 7. 2. 1 Autostore: automatic programming Autostore automatically starts programming radio stations from Preset 1. Available stations are programmed in the order of radio frequencies: RDS stations followed by FM stations. A maximum of 10 RDS stations will be stored (from Preset 01 to Preset 10). English 4 1 To select Autostore radio, a. Use the navigation controls 3 or 4 and 2 to select Autostore radio Display shows: Autostore Please wait. . . After all the stations are stored, the first autostored preset station will then play automatically. 7. 2. 2 Manual programming 1 The radio automatically tunes to a station of sufficient reception. [. . . ] Turn off the wireless Access Point nearby if you encounter difficulty connecting the Center and Station. If you are playing the set, stop playback and take the appropriate measures as follows: Keep the Center or Station at least 3 meters away from such devices. Use the WEP/WPA key when connecting the Center and Station to an existing wireless PC network. To set WEP/WPA key, connect Center/Station to your PC using Philips Wireless Audio Device Manager (WADM) in the by-packed PC Suite CD. In WADM's Device configuration, enter the Wireless Network sub-menu, and in Device Wireless Authentication Type, select WEP or WPA. [. . . ]