User manual PHILIPS UNIVERSAL REMOTE CONTROL SRU9600

[. . . ] You can select the different devices you have installed on your remote control by turning the rotary wheel clockwise or counterclockwise. When you stop rotating, the touch screen and the hard keys will work for that selected device. The most frequently used functions of your devices are covered by these touch screen keys and hard keys. On the touch screen, you see only the functions that are applicable for the selected device. [. . . ] Once you have added a device to your remote control, it will disappear from the list. However, the list of devices contains `TV-2' or `VCR-2' when you want to program a second TV or a second VCR. For example, to watch a DVD you normally would have to: You can delete a programmed device from your remote control. The deleted device will be available again in the list of devices you can add. Check the activities you programmed and Volume keys for your devices and reprogram them if necessary. If a hard key, touch screen key or extra function is not working properly with your device, you can learn the key from your original remote control in your SRU9600. Confirm that you have a working original remote control available to learn from. Select the hard key, touch screen key or extra function you want to fix. Extra functions can be selected by pressing the Jog Mode key, selecting the function with the rotary wheel and pressing OK. Note Fixing a key overwrites the key's data that was stored in your SRU9600. An activity consists of several key presses that will be sent out by your remote control with just one press. By default, the SRU9600 inserts a delay of 300ms between every key press to make sure your devices are responding correctly to the IR signals. If one of your devices needs a longer delay before receiving the next IR signal, you can insert a delay of 3 seconds. 1 Turn the rotary wheel to select a device from the list, press OK and add a key press to the activity. The activity will be available again in the list of activities you can add. You can change the language of your remote control to one of the following languages: Select the option Change language in the Setup menu and press Select the language you want to use on your remote control. When you use the remote control, the backlight, the touch screen and the upper part of the display are switched on. You can change this time out to one of the following options: The time out will be changed for your remote control. The longer the backlight stays on, the faster the batteries will be drained. After devices have been added, the SRU9600 automatically copies the Volume keys, as follows: Video devices, such as DVD, DVDR, VCR and Satellite box, use the Volume keys of the TV (provided that you have programmed a TV). Audio devices, such as CD, MD, Tape and Tuner, use the Volume keys of the Amplifier or Receiver (provided that you have programmed an Amplifier or Receiver). You can change which Volume keys are used, for instance when you want to use the Volume keys of the Amplifier for the DVD. [. . . ] Philips shall not be liable for any incidental or consequential damages for breach of any express or implied warranty on this product. Except to the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose on this product is limited in duration to the duration of this warranty. You may have other rights which vary from state/province to state/province. Operation is subject to the following two conditions: - This device should not cause harmful interference - This device must accept any interference received, including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rule and ICES 003 in Canada. [. . . ]