User manual PHILIPS SWV4152S

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS SWV4152S. We hope that this PHILIPS SWV4152S user guide will be useful to you.


PHILIPS SWV4152S : Download the complete user guide (102 Ko)

Manual abstract: user guide PHILIPS SWV4152S

Detailed instructions for use are in the User's Guide.

[. . . ] Typically used with red/white audio cables. A A Connect the video cable (yellow) from the video output on camera (or other device) to the video input (yellow) located on the side of TV. Use this guide to achieve the optimal connection for each of your components. [. . . ] Used with red/white audio cables. B Connect audio cables (red/white) from audio outputs on device to audio inputs (red/white) TV on the side of TV. Note: for mono devices, connect only white audio cable from device's audio output to white audio input on the side of TV. Video Camera Connection Basics Basic Composite Audio/Video RF Separate video (yellow) and audio (red/white) cables that provide a basic connection from the cable box and other devices. Provides both audio and video. B HDMI Basic VIDEO C Turn on TV and the D Press PLAY on the device to verify device. CH- on the remote control until FRONT/ SIDE appears on TV screen. Other Possible Connections S-Video Refer to panel 3. AUDIO LEFT RIGHT S-VIDEO Video Camera Jack Panel High-Definition Multimedia Interface provides an uncompressed, all-digital audio/video connection. Press CH+ or CH- on remote control to tune to the video supplied by HDMI. A B Remote Control HDMI Input A Connect S-Video cable to S-Video input on back of TV and S-Video output on back of VCR. Press CH+ or CH- on remote control until AV1 or AV2 appears on TV screen. B Connect audio cables (red/white) to audio AV inputs on back of TV and Audio outputs on back of VCR. videotape into VCR and press PLAY to verify correct connection. B Back of VCR A recorded DVD into DVD player/ DVD recorder and press PLAY to verify correct connection. Back of DVD Player/Recorder COMP VIDEO Y Pb OUT Pr OUT OUT L S-VIDEO VIDEO AUDIO R C Turn on TV and VCR. D Insert pre-recorded L R AUDIO OUT VIDEO OUT S-VIDEO OUT ANT/CABLE OUT CH+ and CH- Buttons C Remote Control CH+ and CH- Buttons OR TV Jack Panel AV1 in AV2 in Note: When you connect S-Video and AV2 at the same time, you can only hear sound coming from S-Video . CH+ and CH- Buttons OR TV Jack Panel S-VIDEO AV1 in VIDEO L/Mono Y AV2 in Component Video Input TV VIDEO L/Mono Y AUDIO Pb R Pr COMPONENT VIDEO INPUT Composite Audio/Video AUDIO Pb S-VIDEO A Video connectors into their corresponding jacks on both DVD player/DVD recorder and TV (sometimes labeled Y, Pb and Pr). Insert Component B audio cables into the Connect red/white A COMP VIDEO Y Pb OUT Pr OUT OUT S-VIDEO VIDEO AUDIO B A Connect the video R L R Pr COMPONENT VIDEO INPUT TV audio output jacks on DVD player/DVD recorder and audio AV inputs on TV. [. . . ] Insert a pre-recorded DVD recorder and press PLAY to verify correct connection. Back of DVD Player/Recorder C player/DVD recorder. Press CH+ or CHon remote control until CVI appears on TV screen. Turn on TV and DVD D DVD into DVD player/ cable (yellow) to the VIDEO AV input on back of TV and the corresponding video output on back of VCR. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS SWV4152S




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS SWV4152S will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.