User manual PHILIPS SRU9600

[. . . ] You select the different devices you have installed on your remote control by turning the rotary wheel clockwise or anticlockwise. The moment you stop rotating, the touch screen and the hard keys keys work for that selected device. The most frequently used functions of your devices are covered by the touch screen keys and hard keys. [. . . ] When you press , the remote control executes the sequence of key presses automatically. The Setup menu provides the following options: Option Add device Delete device Fix a key Add a function Add an activity Delete an activity Change language Backlight timeout Copy volume Full reset Description Adds a new device Removes a programmed device Fixes a key that is not working correctly, by learning it from your original remote control Adds an extra function by learning it from your original remote control Combines a sequence of different IR signals Removes a programmed activity Changes the language of the remote control Changes the time-out setting of the remote control Copies the volume keys from one device to another Resets the SRU9600 and deletes all your settings The touch screen keys of the last selected device appear again. To be able to operate your devices with your SRU9600, you will have to add these devices to the remote control. Once you have added a device to your remote control, it disappears from the list. However, the list of devices contains `TV-2' and `VCR-2' for when you want to program a second TV or a second VCR. The deleted device is available again in list of devices that you can add. Check the activities you programmed and Volume keys for your devices and reprogram them if necessary. If a hard key, touch screen key or extra function is not working properly with your device, you can learn the key from your original remote control in your SRU9600. Confirm you have a working original remote control available to learn from. Select the hard key, touch screen key or extra function you want to fix. Extra functions can be selected by pressing the Jog Mode key, selecting the function with the rotary wheel and pressing OK. Note Fixing a key overwrites the key's data that was stored in your SRU9600. An activity consists of several key presses that will be sent out by your remote control with just one key press. By default the SRU9600 inserts a delay of 300ms between every key press to make sure your devices are responding correctly to the IR signals. If one of your devices needs a longer delay before receiving the next IR signal, you can insert a delay of 3 seconds. The activity is available again in the list of activities that you can add. You can change the language of your remote control to one of the following languages: Select the option Change language in the Setup menu and press Select the language you want to use on your remote control. When you use the remote control, the backlight, the touch screen and the upper part of the display are switched on. [. . . ] The remote should now initialise with the Philips logo and you can install the remote control for your devices. If you have any questions about the SRU9600, you can always contact us. You will find our contact details on page 81 of these Instructions for Use. [. . . ]