User manual PHILIPS SRU530

[. . . ] Note: If the mode keys (TV, DVD and VCR) blink four times after every key press, the remote control is indicating that its batteries are running low. Because the SRU530 may use different signals for each brand and even for different models of the same brand, it is advisable to test whether your device responds to the SRU530. [. . . ] Com/urc you can directly select your device typenumber to find the right code. Keep keys 1 and 3 pressed simultaneously for three seconds until the TV key flashes twice and then remains lit. If the key flashes once for an extended period, the code has not been entered properly or the wrong code has been entered. If the TV responds to all of the key commands, the SRU530 is ready for use. If the device does not respond at all, or not to all of the key commands, start again from step 2 and try the next code from the list. The illustration on page 3 gives an overview of all keys and their functions. When pressed at the same time as a second key, the second key will get another function. Stores TV settings Try out other combinations with the SHIFT-key on your device in order to find out which functions are available. - yellow teletext key - pause (VCR/DVD) Jumps back one level in the menu or turns off the menu. If you use the (fi) 'memory off' key to get to the next teletext page on your Philips TV, you can press the Subtitle key for this. If the device does not respond at all, or not to all of the key commands, follow the instructions under `Setting the remote control'. You can select the device you wish to operate with the TV, DVD and VCR keys. If desired, you can program the keys to select a different kind of device. In the following example you will see how to configure the DVD key for a second TV. [. . . ] The model number of your Philips universal remote control is SRU530/86. OBS: Om lägesknapparna (TV, DVD och VCR) blink four times after every key press, angiver fjernbetjeningen, at dens batterier er ved at blive opbrugte. [. . . ]