User manual PHILIPS SBCRU422

[. . . ] Simply press the mode selector as indicated below for the Philips device you wish to operate, and press to test. For other brands of equipment, it needs to be set up first- see Getting Started. To switch between modes, press once to activate, then press it again to advance to the next mode. [. . . ] (Release the keys, the green LED should stay on) 2 Enter the 3-digit code using the keypad. Now, press a few keys on the remote to check that the equipment responds correctly. In the rare instance that none of the codes work, follow the instructions in the next section. Tip: Make a note of the code inside the battery case, and in the back of this booklet in case you ever need to setup again. If you don't know the brand of your equipment or if you can not find it in the codelist, setup still won't take long. philips' patented Handsfree autosearch tests all the codes one after another and finds the right one for you!(Maximum search time is 5 minutes for TV; 2 minutes for VCR) Make sure the TV, VCR etc. You will know when the correct code has been found because the equipment will switch off or the VCR will stop playback. 1 Press and hold 1 and 3 at the same time until the green LED lights up. When the right code is found, the equipment switches off (the VCR will stop playing). If you missed the correct code because the search went too far, switch the equipment back on, then press P (down) to send the previous code again. 4 Once you've found the correct code, press The green LED blinks twice. Now, switch the equipment manually on again, then press a few keys on the remote to check that the equipment responds correctly. In the rare instance that it doesn't, try again from step 1 to find a better code. To save time if you ever need to setup again, make a note of the correct code inside the battery case and in the back of this booklet. In case you have forgotten to note the code you can still 'read out' the code from the remote. [. . . ] If you have questions about your remote or if you are missing certain functions on your remote, call our free-phone helpline!För att växla mellan olika funktioner, tryck på en gång för att aktivera, sedan en gång till för att gå till nästa läge. För att växla mellan funktionerna, tryck en gång för att aktivera, sedan en gång till för att gå till nästa läge. [. . . ]