User manual PHILIPS MCM398D

[. . . ] Micro Hi-Fi System MCM398D Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 2 3 Remove fuse cover and fuse. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. [. . . ] ­ For MP3 disc, the disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc. Text display During CD playback Press DISPLAY (or DISPLAY/MENU on the remote control) repeatedly to see the following information. During MP3/WMA-CD playback Press DISPLAY (or DISPLAY/MENU on the remote control) repeatedly to select three display modes : Track, Album and ID3. ID-3 The ID-3 tag scrolls (if any). Discs for playback This system is able to play : ­ All pre-recorded audio CDs ­ All finalised audio CDR and audio CDRW discs ­ MP3-CDs (CD-ROMs with MP3 tracks) CD-ROM, CD-I, CDV, VCD, DVD or computer CDs, however, are not possible. Playing a disc 1 2 3 Select CD source. Insert a disc with the printed side facing up and press OPEN/CLOSE 0 to close the CD door. "READING" is displayed as the CD player scans the contents of a disc, and then the total number of tracks and playing time (or the total number of albums and tracks for MP3 disc) are shown. Å Selecting a different track Press TUNING S / T (or S/T on the remote control) repeatedly until the desired track number appears in the display. If playback is stopped, pressÉ to start Å playback. 4 To interrupt playback Press É . Å To stop playback Press Ç. 12 CD/MP3/WMA Operations Finding a passage within a track 1 2 Press and hold down on TUNING S / T (or S/T on the remote control). When you recognize the passage you want, release TUNING S / T (or S/T on the remote control). Normal playback continues. Programming the disc tracks Programming tracks is possible when playback is stopped. Up to 20 tracks can be stored in the memory in any order. 1 2 Press PROG on the remote control to enter the programming mode. Press TUNING S / T (or S/T on the remote control) repeatedly to select your desired track number. Selecting a desired album/track (MP3/WMA disc only) To select a desired album Press ALBUM/PRESET 4 / 3 (or ALB +/on the remote control) repeatedly. To select a desired track Press TUNING S / T (or S/T on the remote control) repeatedly. For MP3 disc, press ALBUM/PRESET 4 / 3 (or ALB +/- on the remote control) and TUNING S / T (or S/T on the remote control) to select the desired album and track for programming. 3 4 5 Press PROG to confirm the track number to be stored. To start playback of your disc programme, press Ç followed byÉÅ. Different play modes: SHUFFLE and REPEAT You can select and change the various play modes before or during playback. 1 Press REPEAT/SHUFFLE on the remote control to select : SHUF ­ tracks of the entire disc/ programme are played in random order. SHUF REP ALL ­ to repeat the entire disc/ programme continuously in random order. To return to normal playback, press REPEAT/ SHUFFLE until the various SHUFFLE/REPEAT modes are no longer displayed. If you attempt to programme more than 20 tracks, "FULL" will appear on the display. Pressing ÉÅ button will start playback of the programmed tracks. 2 Reviewing the programme In stop mode, press and hold PROG until the display shows all your stored track numbers in sequence. You can also press 9 to cancel your play mode. Note: ­ If Shuffle is activated on an MP3-CD, all titles stored in the disc will be played in random order. Erasing the programme Press Ç once when playback is stopped or twice during playback. PROG disappears and "CLEAR" is displayed. 13 English Radio Reception English iPod Programming radio stations 398D You can store up to 40 radio stations in the memory. Automatic programming Automatic programming will start with a chosen preset number. From this preset number upwards, former programmed radio stations will be overridden. 1 Press ALBUM/PRESET 4 / 3 to select the preset number where programming should start. Note: ­ If no preset number is selected, default is preset (1) and all your presets will be overridden. Tuning to radio stations 1 2 Press SOURCE on the front panel repeatedly (or FM on the remote control) to select FM. [. . . ] 28 dB Total harmonic distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 ­ 12500 Hz (± 3 dB) Signal-to-noise-ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 x 228 x 247 (mm) GENERAL INFORMATION AC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 x 228 x 273 (mm) Weight (with/without speakers) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]