User manual PHILIPS LX7500R

[. . . ] DVD Recorder Home Theater System LX7500R/05 User manual Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. or BSI approved type. 3 Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note:The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. [. . . ] programme start 20. 15 and VPS/PDC 20. 14), you have to key in 20. 14 as start time. If you want to key in a time that differs from the VPS/PDC time, you have to switch off VPS/PDC. Only one TV programme on a TV channel at a time can be controlled using VPS/PDC. If you like to record two or more TV programmes on a TV channel by using VPS/PDC, you have to programme them separately. English VPS and PDC 33 Timer recording Programming a recording with the VIDEO Plus® system English 0 0 You do not need to tediously enter the date, the programme number, the start and end time. All information needed for programming is contained in the VIDEO Plus® programming number. You can find this number in most of the TV magazines, indicated next to the start time of the TV programme. 1 Switch your TV set on. Such channels may be called AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN, etc. These channels are often near channel 00. Notes: If PlusCode number wrong is displayed, the keyed in VIDEO Plus+® programming number is incorrect. Repeat your entry correctly or end programming by pressing SYSTEM MENU. If Please enter programme number is displayed, the programme number of the TV channel has not yet been allocated to the VIDEO Plus+® programming number. Select the appropriate programme number of the TV channel using 1, 2 or the numerical keys on the remote control and confirm by pressing OK. If daily recording was entered for a wrong day, Weekend programming not possible is displayed. Make sure to enter a day from Monday to Friday. 0 2 Press and hold DVD/MON for 1 second. 4 Press 4 or 3 as often as necessary to select the line VIDEO Plus+ system. To change the timer programme, you can go back at any time. Note: The VIDEO Plus® system does not take the later starting of a TV programme into account. To compensate for a later starting time, switch on VPS/PDC. 5 Press 2 to confirm the selection. 6 Use the numerical buttons to enter the VIDEO Plus® programming number. This number is up to 9 digits long, e. g. To clear, in case you made a mistake, press CLEAR. Timer VIDEO Plus+ system VPS Date Prog. Start PDC 19 0 0 End 9:00 Rec Mode M2 To change the recording mode press 2 to select End. Press RETURN as often as necessary to select the desired recording mode. The entire programming information is stored. 8 Press OK again to store the entire programming PHI 8:00 Mo-Fr/Weekly Press RETURN To store Press OK 0 To exit the timer without storing press TIMER repeatedly. 9 Press TIMER to end. Otherwise previous recordings may be overwritten. If you wish your recording to be repeated, press RETURN as often as necessary to select the desired option: Mo-Fr: for recordings to be repeated daily from Monday to Friday Weekly: for recordings to be repeated weekly (every week on the same day) 12 A timer recording will only start if you have switched the DVD recorder system to standby or if you have selected TUNER, CD, CDR or TAPE: Press 2 or TUNER, CD, CDR or TAPE. If any recordings are programmed, TIMER lights up. 0 7 Press OK to confirm. The timer programme appears. To stop a running timer recording before the scheduled end, press 9 on the DVD recorder system. 34 Timer recording 1 Switch your TV set on. Such channels may be called AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN, etc. These channels are often near channel 00. [. . . ] This setting will have an effect only with DVDs supporting different screen formats. Next, press OK. 8 Press 4, 3 to select the country where you use the DVD recorder system. Next, press OK. 9 Make sure the TV antenna or cable TV system is connected to the DVD recorder system. Next, press OK. Installation Autoinstall Autoinstall Searching for TV channels 12 Channels found Autoinstall complete 48 Channels found Time Year Month Date 18:03 2004 03 25 To continue Press OK Please wait The DVD recorder system will search for available TV channels. This may take several minutes. 10 Check the time and date. [. . . ]