User manual PHILIPS KALA 300 VOX TRIO

[. . . ] Safety precautions : Do not allow the handset to come into contact with liquids. Do not allow the charging contacts or the battery to come into contact with conductive materials. Environmental care : Please remember to observe the local regulations regarding the disposal of your packaging materials, exhausted batteries and old phone and where possible promote their recycling. G You can install your product immediately and start using the phone after charging it for 24 hours. [. . . ] registered to long press, enter the handset number (1 to 4) to call the selected the same base station. * If the handset does not belong to the Philips Kala 300 range, this function may not be available. 7 Press or to answer or hang up the internal call. * If the handset does not belong to the Philips Kala 300 range, this function may not be available. Fast call transfer During a call in progress you can transfer the call without waiting for the other handset to pick up : All the handsets ring. 4 handsets can be registered to the same base station. Call transfer to a specific handset During a call in progress you transfer the call to a specific handset : Long press on enter the handset number (1 to 4) Paging (valid also for Duo, Trio, Quattro packs) for Kala 300 Vox base station This feature allows you to locate the handset(s). All the subscribed handsets ring. stop ringing once relocated or press Adjusting the Kala 300 Vox Base ringer Melodies : 3 melodies are available on the base station. Long press on to enter melody programming mode. The first melody will be played, press to hear the next melody. To validate your choice, let the music play until you hear the validation beep. Melody Volume : 4 volume levels including silent are available on the base station. To validate your choice, let the music play until you hear the validation beep. When the melody is playing, a long press on on the base station. 8 The last selected level will be registered for the next call. deactivates the ringer Using your answerphone Setting up the answerphone The answerphone is by default activated with a pre-recorded message and the answer & record mode. (standard quality) - 6 min (high quality) : including personal outgoing message if recorded. Activating the answerphone From the base station : Long press on From the handset : PQRS beep To exit icon is on. icon blinks. Deactivating the answerphone From the base station : Long press on From the handset : WXYZ beep To exit Playing new messages / playing a memo From the base station : From the handset : From the base station : From the handset : . RC (Registration Code) code is written under to activate the base. PQRS Remotly-activating the answerphone Dial your phone number enter the RC Code* after 9 rings and a beep * or enter your personal enter the RC Code* Remote during the outgoing message to deactivate Access Code (see p 13). During the outgoing message press and enter your remote recorded access code outgoing message. Functions available during remote access Remotly-deactivating the answerphone Dial your phone number WXYZ Keys Functions Replay the message Play the previous message ABC Play the message Play the next message Play the outgoing message Delete the current message Stop playing message JKL DEF JKL MNO TUV GHI To record the outgoing message + press To record a local memo + press TUV TUV GHI ABC Note : If you want to deactivate the remote use see note page 13 in Changing Remote Access Code. 11 Customising the telephone Programming the phone To enter the programming mode press . Icons representing the menus will then be displayed on the screen : Answerphone settings (only for Kala 300 Vox) Volume and melody settings (VIP melodies*) Handset registering Other settings DEF Use DEF and to navigate within the menus. Once the menu is selected with and keys, press in the selected menu. The options will appear on the screen one after the other by pressing at any time press or Icons : flashing to select the menu and steady on once entered in the to enter menu. . To exit the programming mode (long press) . Answerphone settings (Kala 300 Vox only) Changing the day (1st option out of 5 : 1/5) Each day is represented by a number : Monday as 1. . . Sunday as 7. or DEF Changing the time (option 2/5) Enter the time (without any space or dash) and press to validate. Number of rings before answer (option 3/5) You can select from the list (2, 3, 4, 5 and toll saver** ) the number of rings after which the answerphone will take the call. [. . . ] (p 13) - Move closer to the base station. - icon is blinking. - When the handset is placed on the charging unit, no beep is heard. - Take the handset off the base station and put it back again. Please contact your PHILIPS - Battery icon remains empty Handset battery pack is defective. dealer in order to purchase new although the handset has rechargeable battery pack. - Try to plug the base station in - Interference from nearby electrical - Bad audio quality (crackles, elsewhere. [. . . ]