User manual PHILIPS HQ5620

[. . . ] A fully charged shaver has a cordless shaving time of up to 30 minutes. Charging Recharge, store and use the appliance at a temperature between 5cC and 35cC. The powerplug is suitable for mains voltages ranging from 100 to 240V. You cannot use the shaver when it is charging, because the appliance does not work while the battery is being charged. ENGLISH 5 To extend the lifetime of the battery, remove the powerplug from the wall socket and pull the appliance plug out of the shaver when the battery has been fully charged. C 1 Put the appliance plug in the shaver. 2 Put the powerplug in the wall socket. [. . . ] When charging for the first time or after a long period of disuse: leave the shaver to charge continuously for 12 hours. 4 Remove the powerplug from the socket and pull the appliance plug out of the shaver when the battery has been fully charged. 3 A fully charged shaver has a cordless shaving time of up to 30 minutes. Shaving 1 Switch the shaver on by pressing the on/off button once. C Move the shaving heads quickly over your skin, making both straight and circular movements. Your skin may need 2 or 3 weeks to get accustomed to the Philishave system. 2 6 ENGLISH 3 Switch the shaver off by pressing the on/off button once. Put the protection cap on the shaver every time you have used it, to prevent damage. C 4 Replace the shaving heads (type HQ53) every 2 years for optimal shaving results. Trimming For grooming sideburns and moustache. C Open the trimmer by pushing the slide upwards. The trimmer can be activated while the motor is running. 1 Cleaning The easiest and most hygienic way to clean the appliance is to rinse the shaving unit and the hair chamber every day with hot water (60cC-80cC). When you clean the appliance, it is not necessary to take the shaving heads (cutters and guards) apart. C Cleancleancuttersthan one cutter and guard at Do not more a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored. Put the retaining plate back onto the shaving unit. B Cause 3: shaving heads are damaged or worn. ENGLISH 11 Remove the retaining plate. Remove the old shaving heads from the shaving unit and replace them with new ones. Damaged or worn shaving heads (cutters and guards) must only be replaced with the original Philishave HQ53 shaving heads. 2 B B The shaver does not work when the ON/OFF button is pressed. Cause: the battery is empty. Cause: the shaver is connected to the mains. This shaver does not work while the battery is being charged. [. . . ] Cause: the shaver is connected to the mains. This shaver does not work while the battery is being charged. In case of other problems: 3 See 'Information & service'. Accessories The following accessories are available: - Philishave HQ53 shaving heads. - HQ101 Philishave Action Clean refill (shaving head cleaning liquid). [. . . ]