User manual PHILIPS HD4622/20

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS HD4622/20. We hope that this PHILIPS HD4622/20 user guide will be useful to you.


PHILIPS HD4622/20 : Download the complete user guide (502 Ko)

You may also download the following manuals related to this product:

   PHILIPS HD4622/20 (486 ko)
   PHILIPS HD4622/20 (613 ko)
   PHILIPS HD4622/20 (486 ko)
   PHILIPS HD4622/20 (486 ko)
   PHILIPS HD4622/20 (619 ko)

Manual abstract: user guide PHILIPS HD4622/20

Detailed instructions for use are in the User's Guide.

[. . . ] -- Keep the mains cord, the base and the kettle away from hot surfaces. A serving tray), as this could cause water to accumulate under the appliance, resulting in a hazardous situation. -- Do not touch the body of the kettle during and some time after use, as it gets very hot. If the kettle has been overfilled, boiling water may be ejected from the spout and cause scalding. [. . . ] This is perfectly normal and does not mean that the kettle has any defects. This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments; bed and breakfast type environments. boil-dry protection This kettle is equipped with boil-dry protection. This device automatically switches off the kettle if it is accidentally switched on when there is no water or not enough water in it. Then wait for 30 seconds before you place the kettle back on its base to reset boil-dry protection. electromagnetic fields (EMF) This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. Before first use 1 Remove stickers, if any, from the base or the kettle. 3 To adjust the length of the cord, wind part of it round the reel in the base. Pass the cord through one of the slots in the base (Fig. 5 Fill the kettle with water up to the maximum level and let the water boil once (see chapter ‘Using the appliance’). Using the appliance 6 Pour out the hot water and rinse the kettle once more. Tip: Use the cup indications on the appliance to boil the exact amount of water you need. €¯By boiling 1 cup instead of 1 litre, you can save up to 66% of energy. You can fill the kettle either through the spout or through the open lid (Fig. -- Fill the kettle at least to the one cup level (250ml). Note: Make sure that the lid is closed properly to prevent the kettle from boiling dry. 5 Push the on/off switch downwards to switch on the appliance (Fig. The kettle switches off automatically (‘click’) when the water boils. The power-on light goes out automatically when the kettle switches off. [. . . ] 3 After the kettle switches off, add white vinegar (8% acetic acid) to the MAX indication. Storage 1 To store the mains cord, wind it round the reel in the base (Fig. Replacement If the kettle, the base or the mains cord of the appliance is damaged, take the base or the kettle to a service centre authorised by Philips for repair or replacement of the cord to avoid a hazard. You can purchase a new filter (order number 4222 459 45328) at your Philips dealer or at an authorised Philips service centre. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS HD4622/20




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS HD4622/20 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.