User manual PHILIPS GC3320

[. . . ] Acrylic, nylon, polyamide, polyester) -1 Silk - 2 Wool - 3 Cotton, linen If you do not know what kind or kinds of fabric an article is made of, determine the right ironing temperature by ironing a part that will not be visible when you wear or use the article. The steam boost function can also be used when you hold the iron in vertical position. This is useful for removing creases from hanging clothes, curtains etc. [. . . ] Make sure that the steam setting you select is suitable for the ironing temperature selected: (Fig. 7) - 1 - 2 for moderate steam (temperature settings 2 to 3) - 3 - 4 for maximum steam (temperature settings 3 to MAX) Note:The iron starts to steam as soon as it has reached the set temperature. Note:If the selected ironing temperature is too low (MIN to 2), water may drip from the soleplate (see chapter `Features', section `Drip stop'). Features Spray function You can use the spray function to remove stubborn creases at any temperature. The steam boost function can only be used at temperature settings between 2 and MAX. Concentrated steam boost from the special Steam Tip (GC3360/3340 only) The concentrated steam boost from the long vents in the Steam Tip enhances the distribution of steam into every part of your garment. The concentrated steam boost function can only be used at temperature settings between 2 and MAX. 1) Spray nozzle Filling opening with cap Steam boost button (9) Spray button (8) Steam control Amber temperature light (GC3360 only: and red auto-off light) Calc-Clean button Temperature dial Mains cord Heel Anti-Calc tablet (GC3388/3360/3340/3332/3331/33 30/3321 only) Water tank Before first use 1 Remove any sticker, protective foil or plastic from the soleplate (Fig. Preparing for use Filling the water tank Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the water tank. 4 Tilt the iron backwards and fill the water tank with tap water up to the maximum level with a filling cup. Storage 1 Set the steam control to position 0, remove the plug from the wall socket and let the iron cool down. 2 Clean the appliance and wipe scale and any other deposits off the soleplate with a damp cloth and a non-abrasive (liquid) cleaner. 3 Regularly rinse the water tank with water and empty it after cleaning (Fig. , Environment Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. Question Why does water drip from the soleplate after the iron has cooled down or has been stored (GC3321/ GC3320 only)?Steam ironing: Question Why doesn't any steam come out of the iron? Answer You may have put the iron in horizontal position with water still left in the water tank. Empty the water tank and set the steam control to position 0 after use. [. . . ] Continue ironing in horizontal position and wait a while before you use the horizontal or vertical steam boost function again. Put the iron on its heel and wait until the amber temperature light goes out before you start to iron. set the temperature dial to a temperature suitable for steam ironing (2 to MAX). [. . . ]