User manual PHILIPS FW320C

[. . . ] Mini HiFi System FW320C 1 Important notes for users in the U. K. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. [. . . ] · If you press DISC CHANGE again during playback, the CD will stop playing. TM The CD carousel tray will rotate until the inner tray is at the right hand side and is ready for changing. 3 Press OPEN·CLOSE to close the CD compartment. Searching for a particular passage during playback · Press and hold à or á until the desired passage is located. · Play returns to normal when à or á is released. Notes: ­ If the total playing time is more than "99:59" or if one of the programmed tracks has a number greater than 30, then "--:--" appears in the display instead of the total playing time. ­ During programming, if no button is pressed within 20 seconds, the system will exit program mode automatically. CD Playing the program 1 Press PLAY É to start program playback. TM The track number and elapsed playing time of the current track will appear on the display. · If you press REPEAT during program playback, the current track will be played repeatedly. 2 Press STOP·CLEAR Ç to stop program playback. Erasing the program (in the stop mode) · Press STOP·CLEAR Ç on the system. TM "PROGRAM CLEARED" will be displayed. Note: ­ The program will be erased when the system is disconnected from the power supply. If the CD carousel is opened, the tracks belonging to the outer two trays will be erased and the display will show "CLEARED" . Repeat (only on remote control) It will play the current track repeatedly. · The track will now be played repeatedly until you press STOP·CLEAR Ç. TM The REPEAT flag disappears from the display. English 14 Note: ­ If you press any of the CD DIRECT PLAY button, the system will play the selected disc or track and the stored program will be ignored temporarily. The PROGRAM flag will also temporarily disappear from the display and then reappear when the playback for the selected disc ends. Shuffle (only on remote control) It will play all the available discs and their tracks in random order. TM The SHUFFLE flag, the disc and the track selected at random appear on the display. · The discs and the tracks will now be played in random order until you press STOP·CLEAR Ç. · If you press REPEAT during shuffling, the current track will be played repeatedly. TM The SHUFFLE flag disappears from the display. Reviewing the program Reviewing of the program is only possible in the stop mode. · Press PREV í or NEXT ë repeatedly to review the programmed tracks. · Press STOP·CLEAR Ç to exit review mode. TUNER RDS OPTIMAL JAZZ NEWS! STEREO NEWS REPLAY REPEAT SHUFFLE PROGRAM TIMER FM REC HSD MW DBB LW IS AM PM MAX DSC DBB CLOCK TIMER PROGRAM TECHNO ROCK MAST ER VOLUME You can store up to 40 radio stations in the memory. When a preset radio station is selected, the preset number appears next to the frequency on the display. 2 Press TUNER (BAND) again to select the desired waveband : FM, MW or LW. TM Every available station for the selected waveband will be stored automatically. [. . . ] Cleaning Discs · When a disc becomes dirty, clean it with a cleaning cloth. · Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog records. Cleaning the CD lens · After prolonged usage, dirt or dust may accumulate at the CD lens. To ensure good playback quality, clean the CD lens with Philips CD Lens Cleaner or any commercially available. [. . . ]