User manual PHILIPS FW-C505

[. . . ] If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. if the mains plug contains a fuse , this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. [. . . ] DSC (Digital Sound Control) The DSC feature enables you to adjust the system to suit your type of music. To listen through the headphones G Connect the headphones plug to the n socket at the front of the system. You can manually select the DBB setting that best suits your listening environment. Incredible Surround The Incredible Surround magnifies the virtual distance between the front speakers for an incredibly wide, enveloping, stereo effect. Note: ­ Some discs or tapes might be recorded in high modulation, which causes a distortion at high volume. Therefore, do not use any accessories such as disc stabiliser rings or disc treatment sheets, etc. , as offered on the market, because they may jam the changer mechanism. This system can playback all digital audio CD, finalised digital audio CD-Recordable (CDR) discs and finalised digital audio CD-Rewritable (CDRW)discs. The selected disc tray, total number of tracks and the playing time will appear on the display. ­ To ensure good system performance, wait until the disc tray completely reads the disc(s) before proceeding. A disc is loaded in the disc tray the current selected disc tray is empty the current selected disc tray is loaded or playing The disc tray will close to retrieve the inner disc, then reopen with the inner disc accessible. During playback, the selected disc tray, track number and elapsed playing time of the current track will appear on the display. to playback one disc only G Press the DISC DIRECT PLAY button : DISC 1 , DISC 2 or DISC 3. To search for a particular passage during playback G Press and hold à or á and release it when the desired passage is located. To select a desired track G Press í or ë repeatedly until the desired track appears on the display. Note: ­ In Shuffle mode, pressingí will cause the player to skip only to the beginning of the current track. To skip to the beginning of the current track during playback G Press í once. The total number of tracks programmed and the total playing time will appear on the display. Notes: ­ If the total playing time is more than "99:59" or if one of the programmed tracks has a number greater than 30, then "--:--" will appear on the display instead of the total playing time. ­ If you attempt to programme more than 40 tracks, "PROGRAM FULL" will be displayed. ­ If you press any of the DISC DIRECT PLAY buttons, the system will playback the selected disc or track, and the stored programme will be ignored temporarily. ­ During programming, if no button is pressed within 20 seconds, the system will exit the Programme mode automatically. [. . . ] To start from a specific track, make a programme (refer to "CD Operation - Programming the disc tracks"). "TIMER ON" will be displayed and followed by the set timer "XX:XX" and then the selected source. Notes: ­ If the selected source (CD) is not available when preset timer is reached, TUNER will be selected automatically. ­ During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. [. . . ]